Instructions / Assembly

Stand the Chair up.
Place the Chair on a LEVEL SURFACE.
Inspect it and make sure all parts are adequately connected.
Gently and carefully, sit on the Chair.
This will help align all parts at all joints.
Then get off the Chair, and in a sequential manner, proceed to tighten all Bolts.
When tightening the Bolts, tighten sequentially.
DO NOT tighten any Bolt fully and then move on to the next one. This may
cause the frame to warp. If the chair wobbles after tightening, loosen the Bolts
and execute the same process.
If the Chair is not stable it could lead to damage of the product.
Your Chair is ready for use.
This Chair can only be used on a flat and level surface.
Page 5 OF 6