Instructions / Assembly

Step 4

Disassembly Note:Open the flap on the Chair Backrest(A),use a screwdriver(Don't

use fingers) pressing outward on the metal ear on the preattached Metal Bracket on

one side of the Chair Backrest(B),with assistance of you adult partner to keep the

Chair base(B) in place, pull out the Chair Backrest(A) upward at the same

time,repeat the same step for another side.Then the Chair Backrest(A) can be

taken out.

With assistance from your adult partner, hold up the fully assembled backrest ,

stand behind the chair.

Insert the preattached Metal Bracket on the sides of the Chair Backrest(B) into the

preattached slide lock gadget on the Chair Base(B) as shown above.

Firmly but gently, push the Chair Backrest(A) downwards until the Chair

Backrest(B) is fully slotted and locked into position.

Smooth down the outer flap, at the back, on the Chair Backrest(A).

Run your hands down both sides of the flap, from top to bottom, allowing the adhere

tape to adhere to the flap under the seat of the chair.

Your Recliner is ready for use.

Metal Ear

Chair Base (B)

Chair Backrest(A)

Noble House Home Furnishings LLC

Page 5 OF 7