Instructions / Assembly

Stand theTrolley up.
Check for stability and then tighten the Bolts and Nut Caps.
DO NOT fully tighten a Bolt or Nut Cap in one go and then move on to the next.
Rather, in a sequential manner, gradually tighten each Bolt and Nut Cap until all Bolts and Nut
Caps are evenly secured.
This methodology will ensure maximum evenness once all Bolts and Nut Caps are fully
tightened.
Note: This step is done better with the assistance of a second adult.
Step 6
Your Trolley is ready for use.
The Trolley can be only used on a flat, level surface.
Step 4
Place the Trolley face down as shown.
Align the 'X' Iron Stretcher(D) with the four corners of the Trolley.
Attach 'X' Iron Stretcher to the Trolley using Nut Caps(①) with Wrench(②).
Do not fully tighten the Nut Caps.
Step 5
Page5 of 6