Instructions / Assembly

Page 6 of 9
Step 3
Position Right Leg Support Bar (G) to Rocking Base (E) and Right Leg Panel (D)
3.1.1) Attach Long Bolt (②) to the top of Cross Nut(⑤) by hand, turning clockwise. Insert
both into housing position of Right Leg Support Bar (G)
3.1.2) Insert the Long Bolt (②) through the housing position of Rocking Base (E) and affix
to Cross Nut (⑤) inside of Right Leg Support Bar (G), tighten with Allen Key(⑥
)
3.2) Remove the first Long Bolt (②
) by hand
3.3) Secure Right Leg Support Bar (G) to Right Leg Panel (D) by usnig Short Bolt (③),
Sleeve Nut (④) and Allen Key (⑥)
Do not fully tighten the Bolt.
Repeat the same process of Step 2 and 3 for the other Left Leg Panel (C) and Left Leg
Support Bar (F)
3.1.2
D
E
G
6
2
2
5
2
3.1.1
3.2
3.3
6
3
4
6
Noble House Home Furnishings LLC