Installation Guide

g
Part E.
This next step guides you to connect the Fire Table / Column Regulator to the Gas Cylinder.
User's Guide : Loading of Gas Tank into the Fire Table / Column.
User's Guide : Connecting the Fire Table / Column to the Gas
Cylinder.
Step 1 : Plug the Black Coupling Nut on the
Regulator to the Cylinder Valve.
Step 2 : Turn the Black Coupling Nut, fully
CLOCKWISE until fully locked into the position.
Step 3 : Check for Leaks by : Brush some soap and
water mixture on all connections.
Turn the gas supply on;if extra large bubbles form
on any connection there may be a leak. If you smell
gas or a leak is discovered, IMMEDIATELY turn the
gas valve off, disconnect Propane Gas tank.
Do not use the appliance until the leak is repaired
Fire table must be 60 inches away from the gas tank
Please be careful not to trip over the gas pipe