Use and Care Manual

Step 3.1: Repeat the same assembly process for the remaining three Table Legs(C).
Step 3.2: Place the Shelf(B) between the Table Legs(C) as shown above.
To align the opening on the shelf with the mounting position on the legs, then assemble
the Shelf(B) inside the four Table Legs(C) using Bolts(②) and
Washers(③) with Allen Key(①).
Do not fully tighten the Bolts.
Step 2
Align the Table Leg(C) with mounting positions of the Table Top with Glass(A).
Attach Table Leg(C) using Bolts(②), and Washers(③) with Allen Key(①).
Do not fully tighten the Bolts.
Step 3
Step3.2
Step3.1