Instructions / Assembly

This Single Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Single Chair
parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to
familiarise yourself with the parts and steps before assembly.
Step 1
Step 2
Open the carton and place all the parts onto a clean, non-marring surface.
Place the Left Armrest(B) facing up.
Step 1.1 Attach Chair Seat(C) to Left Armrest(B) using Bolt(➁) and Washer(➄) with Allen Key(➀).
Step 1.2 Attach Chair Seat(C) to Left Armrest(B) using Bolt(➂) and Washer(➄) with Allen Key(➀).
Only loosely tighten the Bolts.
ATTENTION: There may be some PE wicker that may have covered the Bolt points.
To ease assembly, guide and slide the PE wicker away from the mounting positions.
DO NOT CUT AWAY any PE WICKER as this would cause the wicker to unravel!
Step 2.1Attach Chair Back(D) to the Left Armrest(B) and Chair Seat(C) using Bolt(➁) and Washer(➄) with Allen Key(➀).
Step 2.2 Attach Chair Back(D) to the Left Armrest(B) and Chair Seat(C) using Bolt(➂) and Washer(➄) with Allen Key(➀).
Only loosely tighten the Bolts.
3 OF 6