Caution: You must read this before you proceed Single Chair Label Description QTY A Right Armrest 1 B Left Armrest 1 C Chair Seat 1 D Chair Back 1 E Back Cushion 1 F Seat Cushion 1 Description QTY Label Picture Picture 1 OF 6
➀ Allen Key 1 ➁ Bolt (M6*30mm) 7 ➂ Bolt (M6*40mm) 6 ➃ Bolt (M6*95mm) 3 ➄ Washer 14 ➅ PE Cap 3 Before Beginning Assembly: OVERVIEW Chair Back(D) Back Cushion(E) Left Armrest(B) Seat Cushion (F) Right Armrest(A) Chair Seat(C) FRONT FACING 2 OF 6
This Single Chair has multiple parts and may require up to 30 minutes to assemble. To give you an overview of the Single Chair parts, the above picture is to help you put the various parts into perspective. Please read through the instructions below to familiarise yourself with the parts and steps before assembly. Step 1 Open the carton and place all the parts onto a clean, non-marring surface. Place the Left Armrest(B) facing up. Step 1.
Step 3 Place the Single Chair as shown in the picture above. Align the mounting positions of the Left Armrest(B) onto the Chair Back(D). Attach Left Armrest(B) and using Bolt(➃) and Washer(➄) with Allen Key(➀). Only loosely tighten the Bolts. Step 4 Step 4.6) Attach Right Armrest(A) to the Chair Seat(C) and Chair Back(D) using Bolt(➂) and Washer(➄) with Allen Key(➀). Step 4.7) Attach Right Armrest(A) to the Chair Seat(C) and Chair Back(D) using Bolt(➁) and Washer(➄) with Allen Key(➀).
Step 5 Place the Single Chair as shown in the picture above. Align the mounting positions of the Right Armrest(A) onto the Chair Back(D). Attach Right Armrest(A) and Chair Back(D) using Bolt(➃) and Washer(➄) with Allen Key(➀). Only loosely tighten the Bolts. Step 6 Turn the Single Chair right side up. Place the Single Chair on a LEVEL SURFACE. Inspect it and make sure all parts are adequately connected. Gently sit on the Single Chair. This will help to align all parts at all joints.
OF 6
