User's Manual

NoWiresNeeded
Page 34 of 41 11 Mbps Wireless LAN PC Card User manual
6.2 Windows NT4
Q: I inserted the 11 Mbps Wireless LAN PC Card before it was
installed and I rebooted the system. I also have another network
card. Now my other network card does not function properly.
A: You should insert the 11 Mbps Wireless LAN PC Card only after
you have installed it via the Network Control Panel.
Q: I installed the 11 Mbps Wireless LAN PC Card but it does not
work. What can I do?
A: Please follow the steps below:
1. Look for the Connect icon in the right-hand corner of the
taskbar. If it is there, proceed with step 3.
2. If the Connect icon is not there, there is something wrong
with the NT installation. Run the Event Viewer in
Administrative Tools (Windows Program menu). Select the
System Log in the Log menu. Look at the recent entries by
double-clicking.
• If the description indicates a resource conflict, the IRQ or
I/O base settings must be adjusted. Double-click on
"Network" in the Windows Control Panel and select the
Adapters tab. Select <Properties> of the 11 Mbps Wireless
LAN PC Card Adapter.
• If NT did not detect a resource conflict but you used 0x278
for the 11 Mbps Wireless LAN PC Card, there may be an
undetected conflict with the Plug-and-Play features of the
ISA bus. Try another I/O base.