User's Manual
Table Of Contents
- Trade Marks
- Copyright statement
- FCC Radiation Exposure Statement
- R&TTE Compliance Statement
- Safety
- Restriction of use
- Intended use
- EU countries intended for use
- EU Countries not intended for use
- Potential restrictive use
- Declaration Of Conformity
- 1 Introduction
- 2 Wireless LAN basics
- 3 Series 1100 installation
- 3.1 Hardware installation
- 3.2 11 Mbps Wireless LAN ISA Card installation
- 3.3 11 Mbps Wireless LAN PC Card Windows 95 installation
- 3.4 11 Mbps Wireless LAN PC Card Windows 98 installation
- 3.5 11 Mbps Wireless LAN PC Card Windows NT4 installation
- 4 Connect‘
- 4.1 Appearances
- 4.2 Establishing a connection
- 4.3 LED indicator
- 5 Network protocols
- 6 Troubleshooting
- 6.1 Windows 95/98
- 6.2 Windows NT4
- 6.3 Connect‘
- 7 Technical Specifications 11 Mbps Wireless LAN PC Card
- 8 Software Installation
NoWiresNeeded
Page 20 of 41 11 Mbps Wireless LAN PC Card User manual
3.5 11 Mbps Wireless LAN PC Card
Windows NT4 installation
1. Go to the Windows Control Panel and double-click on
’Devices’.
2. Look for ’PCMCIA’ in the list that appears. If the Status
column indicates ’Started’ and the Startup column indicates
either ’Boot’ or ’Automatic’, proceed to step 4. If this is not
the case, you should continue with step 3 first.
3. Click on the Startup button, check the ’Boot’ radio button
and click on <OK>.
4. Go to the Windows Control Panel and double-click on
Network.
5. In the window that appears, go to the Adapters tab and
click on <Add>.