User's Manual
Table Of Contents
- Trade Marks
- Copyright statement
- FCC Radiation Exposure Statement
- R&TTE Compliance Statement
- Safety
- Restriction of use
- Intended use
- EU countries intended for use
- EU Countries not intended for use
- Potential restrictive use
- Declaration Of Conformity
- 1 Introduction
- 2 Wireless LAN basics
- 3 Series 1100 installation
- 3.1 Hardware installation
- 3.2 11 Mbps Wireless LAN ISA Card installation
- 3.3 11 Mbps Wireless LAN PC Card Windows 95 installation
- 3.4 11 Mbps Wireless LAN PC Card Windows 98 installation
- 3.5 11 Mbps Wireless LAN PC Card Windows NT4 installation
- 4 Connect‘
- 4.1 Appearances
- 4.2 Establishing a connection
- 4.3 LED indicator
- 5 Network protocols
- 6 Troubleshooting
- 6.1 Windows 95/98
- 6.2 Windows NT4
- 6.3 Connect‘
- 7 Technical Specifications 11 Mbps Wireless LAN PC Card
- 8 Software Installation
NoWiresNeeded
Page 14 of 41 11 Mbps Wireless LAN PC Card User manual
3 Series 1100 installation
3.1 Hardware installation
For detailed information on how to add new hardware to your specific
computer configuration, please follow the guidelines of your
computer manufacturer.
3.2 11 Mbps Wireless LAN ISA Card
installation
The 11 Mbps Wireless LAN ISA Card is used as an adapter for the
11 Mbps Wireless LAN PC Card in systems without a free PCMCIA
slot, but with a free ISA slot.
Important: always install the 11 Mbps Wireless LAN ISA Card
first before inserting the 11 Mbps Wireless LAN PC Card into it.
Please follow the procedure below to install the 11 Mbps Wireless
LAN ISA Card in your computer.
1. Shut down the computer.
2. Remove the computer’s metal casing.
3. Place the 11 Mbps Wireless LAN ISA Card in a free ISA
slot (the 11 Mbps Wireless LAN PC Card should not be
inserted in the 11 Mbps Wireless LAN ISA Card at this
time).
4. Replace the computer’s metal casing.
5. Switch on the computer.