User's Manual

No Wires Needed
User manual Swallow 1100 PC Card Page 21 of 44
10. Now you must select an IRQ Number and an I/O
Base. Windows NT can not see if the default values
are conflicting with other hardware. To make sure,
look in Start -> Programs -> Administrative Tools ->
Windows NT Diagnostics and select the Resources
tab. Here you see which IRQs are already used.
When clicking the <I/O Port> button below, you also
see which I/O ports are already used. Select an
unused IRQ and unused I/O base for the Swallow
1100. Note that the Swallow 1100 requires 8 I/O
ports, so it will occupy the I/O Base + 7 ports. When
you selected both, click <OK>.