Basic Guide

fig. 5
x5
fig. 6
Loosen the washing machines adjusting feet using the
key supplied with your washing machine, then undo 5
complete turns (fig. 5 and 6).
Important! If the feet are already partly undone, you
must first screw them on again and then undo 5 com-
plete turns.
fig. 7 fig. 8
Slide the stand under the washing machine so that its
front adjusting feet match the stands front brackets (fig.
7) and the rear bracket is positioned against the ma-
chines back (fig. 8).
fig. 9
Screw the rear bracket on-
to the machines back us-
ing one of the supplied
screws (fig. 9).
fig. 10 fig. 11
Return machine and stand to a vertical position, and
screw the other bracket onto the stand and the machines
back using the remaining supplied screws (fig. 10 and
11).
fig. 12 fig. 13
The stand is now installed; check whether your washing
machines back feet rest on it (fig. 12). Otherwise undo
them using the key supplied with your washing machine
(fig. 13).
fig. 14 fig. 15
The stands drawer, with a capacity of up to 35 kg, con-
tains two dividers; they may be taken out if you wish
(fig. 14). The drawer was designed with a special com-
partment inside where you can place a folding plastic
box, supplied, quite useful to store your washing laun-
dry (fig. 15).
fig. 16 fig. 17
3