User's Manual

Battery and Channel ID
Note: This section applies for Wireless varoamt mouse only.
 Symble in the task bar provide information on the charge staus of the
batteries.
The symble means that the batteries are full. The symble means that the
batteries are discharged.
 The Wireless Mouse is preset to work without problems in most environments.
Should your mouse not work properly, the problem may be due to interference
from other devices in your environment. To resolve the problem, please refere
below setting.
ID Mode: Suggested working environment - Office
Press Sync button on the receiver. Press Sync buttonon on the mouse until the LED
on receiver is turns off. The ID Mode is set.
Non-ID Mode: Suggested working environment - Home or SOHO office
Press Sync button on the receiver for approx. 5 seconds. Note the light will dim after
releasing button. When light is dimmed, Non-ID mode is set.
- 7 -