User's Manual

Setting Up Your Mouse
Hardware Installation
Important: Before connecting your mouse or installing the software, be
sure to identify the type of mouse port you are using (USB, PS/2). Refer to
the diagrams below if you are having difficulty determining what kind of
port your mouse uses.
PS/2 Port USB Prot
Connecting the PS/2 Mouse
Note: Before coneect the mouse to your system, please make sure your computer is off.
• Turn off your computer.
• Connect the mouse cable to the PS/2 (6-pin) mouse port.
• Turn on the computer.
Connecting the USB Mouse
Note: To use the USB mouse, you need to have Windows 98 / 2000 / ME / XP installed
on your computer.
• You don’t need to turn off your computer before connect your USB mouse.
• Plug the rectangular USB mouse connector into the USB port (normally in the back
of the PC).
• Insert the software diskette into your disk drive and follow the onscreen instructions
to install the device driver.
- 2 -