Users Manual

(Width) the drop box selection shows two bandwidths for selection

20MHz, 40MHz and 80MHz

Note: To apply changes click Save & Apply or for many changes click

Save and after finishing click save & Apply (at the bottom of the screen)

2. Advance Settings Tab

Select the advanced settings tab

Country Code: The drop box selection shows the available country

codes (ISO/IEC Alpha2). This Selection affect the Operating Frequency

and the Transmit power

Note: To apply changes click Save & Apply or for many changes click

Save and after finishing click save & Apply (at the bottom of the screen)

B. Interface Configuration

General Setup and Wireless Security Tab are Configure identically than the

2.4GHZ wireless (refer to page 18)

1. Advance Setting Tab

The configuration is done identical to the 2.4GHvz except for:

Number of Spatial Streams: Parameters MIMO. System 2x2

LDPC: Low-density parity-check (LDPC) code is a linear error correcting

code, a method of transmitting a message over a noisy transmission

channel

RX STBC: Space -Time Block Coding Rx

TX STBC: Space -Time Block Coding Tx