Users Manual

Note: For This section WP2-PSK is used.

Cipher: Subtype of encryption

Key: Enter the pre-shared Passkey to be used by devices that will

associate with this SSID. Note that the key must meet the criteria of the

Security setting chosen.

Note: To apply changes click Save & Apply or for many changes click

Save and after finishing all the changes click save & Apply (at the bottom

of the screen)

3. Advance Setting Tab

802.11h: This minimizes data loss when radio moves to the new channel

Separate Clients: The drop box selection shows the available type of

encryptions available.

UAPSD Enable: Tick to enable. This feature reduces the latency of

traffic flow that is delivered over the wireless media.

Multicast Rate: The multicast rate is the minimum speed that a wireless

device must be able to communicate at in order to connect to the router.

So, the lower the multicast rate, the further away, or more accurately,

the weaker the wireless signal, are allowed to connect

Fragmentation Threshold: This value is used to set the maximum size

of a packet that can be sent. Smaller packets improve reliability, but they

will decrease performance. Common Value 1584