Datasheet

Series EB
Light Touch Miniature Pushbuttons
C29
Indicators
AccessoriesSupplement Tactiles KeylocksRotaries
C
PushbuttonsIlluminated PBSlides Programmable
Toggles
Rockers
Touch
Tilt
www.nkk.com
HARDWARE
Installation/Assembly
2 AT513M Metric Hexagon Nuts
1 AT509 Internal Tooth Lockwasher
AT513M
Metric Hexagon Nut
Material:
Brass with
Nickel Plating
AT509
Lockwasher
Material:
Steel with
Zinc/Chromate
Metric Bushing
Without
Bottom Hex Nut
See Accessories & Hardware section for optional Conical Nuts:
AT512M used with cap AT443 and AT512CM used with cap AT442.
AT507M
Metric Locking Ring
Material:
Steel with
Zinc/Chromate
(8.0)
.315
M6 P0.75
(9.0)
.354
(1.5)
.059
(2.0)
.079
(5.5)
.217
(6.0) Dia
.236
(12.0) Dia
.472
(1.7)
.067
(0.8)
.031
(6.4) Dia
.252
(10.2) Dia
.402
(0.5)
.020
Optional Hardware:
AT507M Metric Locking Ring
Standard Hardware Optional Hardware
(8.0) Dia
.315
(0.8)
.031
(2.5)
.098
M6 P0.75
(1.7)
.067
(8.5)
.335
With
Standard Hardware
Face Nut
Locking Ring
(Optional)
Lockwasher
Lock Nut
With Standard Hardware
& Optional Locking Ring
(6.5) Dia
.256
(6.5)
.256
(2.2) Dia
.087
PANEL CUTOUTS & THICKNESSES
Maximum Effective
Panel Thickness:
.185” (4.7mm)
Maximum Effective
Panel Thickness:
.118” (3.0mm)
Maximum Effective
Panel Thickness:
.055” (1.4mm)
Note: Cap must be snapped on
after the switch is mounted
into the panel.
(6.2) Dia
.244
(5.6)
.220
(0.6)
.024
(6.5) Dia
.255