Datasheet

Series DS
Tilt Switch
www.nkk.com
K
Indicators
AccessoriesSupplement
Tactiles
KeylocksRotaries
Pushbuttons
Illuminated PB
Slides
Programmable
Rockers
Touch Tilt
K4
Toggles
DSA SWITCH PART NUMBER & DESCRIPTION
Sealed Body
DSA01
DSA SWITCH SPECIFICATIONS
Mechanical & Electrical Specifications
Poles and Circuits: Single Pole Single Throw ON – OFF
Operating Range: ON Angle = 10° ~ 170°; OFF Angle = 190° ~ 350°
Resistive Load: 0.1A @ 12V DC
Contact Resistance: 100 milliohms maximum
Insulation Resistance: 50 megohms minimum @ 250V DC
Dielectric Strength: 250V AC for 1 minute minimum between terminals
Mechanical Life: 100,000 operations minimum
Electrical Life: 100,000 operations minimum
Environmental Specifications
Operating Temperature Range: –10°C ~ +70°C (+14°F ~ +158°F)
Storage Temperature Range: –25°C ~ +85°C (–13°F ~ +185°F)
Contact Bounce (for reference): 500ms maximum
Humidity: 90% humidity for 96 hours @ 40°C (104°F)
Vibration (for reference): Frequency range 10Hz ~ 500Hz for 2 hours; 2 directions; Acceleration: 0.2G
Notes: 1. Do not install switch near vibration source.
2. Terminals should not be exposed to liquid.
Materials & Finishes
Housing: PBT
Rubber Rings: Nitrile Butadiene Rubber
Contact Balls: Brass with Silver Plating
Terminals: Brass with Silver Plating
SPST ON – OFF
Processing for AT094 PCB Adaptor
Soldering (with PCB Mount Holder):
Wave Soldering: See Profile A in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Automated Cleaning: Hand clean locally using alcohol based solution.