Datasheet

Series HB
Subminiature Pushbutton Switches
NKK Switches • email: [e-mail] • Phone [phone] • Fax [phone] www.nkkswitches.com
Plunger Position
( ) = Momentary Connected Terminals Throw & Power/Lamp Schematics
Normal Down Normal Down
Pole Model
HB15 ON (ON)
HB16* ON ON
.354" Square
S
POLES & CIRCUITS
SHAPES
.354" Round
C
Housing available in black only.
K
HOUSING
Silver Contacts Power Level 0.1A maximum @ 30V AC/DC
W01
Solder Lug
The .039" x .079" oblong hole
accommodates one solid or one
stranded 20-gauge wire or two 22-
gauge wires.
CONTACT MATERIALS, RATINGS, & TERMINALS
SP
1-3 1-2 SPDT
The bezel is an integral
part of the switch body.
The bezel is an integral
part of the switch body.
Notes: Terminals are marked with NO, NC, C, L.
LED circuit is isolated and requires
external power source.
(8.0) Dia
.315
Panel Cutout & Mounting
Recommended Panel Thickness:
0.5mm ~ 5.0mm (.020" ~ .197")
Overtightening the mounting nut
may damage the switch housing.
PCB Mounting
Solder lug terminals are spaced
.100" X .200". This enables PCB
mounting which can be accomplished by
elongating PC board holes to .080".
(5.0)
.197
(1.8)
.071
(1.0)
.039
(2.0)
.079
Thk = (0.3)
.012
1
32
(COM)
(+) (-)
*When in latchdown position for the alternate circuit, cap position is 1.3mm (.051") above the built-in bezel.
8-01