Datasheet

• Power Supply Control Equipment
• Measuring Equipment
• Medical Equipment
• Communication Equipment
General Specifications
▲
Actual Size
▲
Applications
Each rated value/performance value is obtained through independent testing. Therefore, the same results are not guaranteed under complex conditions.
Please refer to General Specifications page in General Catalog "Switch Guide" on specific models, ratings and ordering instructions.
Sliding Contact Mechanism
The switch contacts are gold plated and
equipped with a sliding dual-contact mechanism
for improved contact reliability.
Improved Contact Reliability
The switch contacts feature a sealed design to
lock out water, gas, foreign particles, or dust
and to ensure high contact reliability and
consistent quality.
Enhanced Mounting Strength
Includes a bracket to enhance mounting strength
on printed circuit boards.
Antilifting Design
The bracket feet are crimped to ensure secure
PC mounting and to prevent dislodging during
soldering.
Fully Washable
The switch contacts feature a sealed design
enabling automated soldering and cleaning.
Light Operating Feel
The switching mechanism uses a steel ball to
ensure light operation and positive feeling of
actuation.
Locking Out Flux
Insert molded terminals and a sealed design
lock out flux, solvent and other contaminants.
Provides Crisp Feedback in Miniature Body
(Registered design)
General Specifications
Electrical Capacity
0.4VA maximum @ 28V maximum (AC/DC)
（
Applicable Range 0.1 mA ~ 0.1A
@ 20mV ~ 28V
）
Contact Resistance 100mΩ maximum (10mA @ 20mV)
Insulation Resistance 100MΩ minimum @ 500V DC
Dielectric Strength 500V AC for 1 minute minimum
Mechanical Life 30,000 minimum round-trip cycles
Electrical Life 10,000 minimum round-trip cycles
Operating
Temperature Range
-25°C through +70°C (-13°F through +158°F)
Soldering
▼
Manual soldering: Profile A
▼
Wave Soldering: Profile A
See Profile A in the supplementary section "Switch
Guide".
原 寸 大
NR01 Series
Miniature Rotaries
2
www.nkk.com