Owner's Manual

BATTERY CHARGING
Before first use, the device should be charged completely. Connect the included power
supply cable to a USB supported charging device and the other end to the unit itself.
The approximate time for a full charge is 3 hours. The DC charging port for the built-in
rechargeable battery has 5V/1A input.
During charging:
• When the battery is below 30%, one LED flashes blue.
• At 30-70%, two LEDs flash blue. At 70-99%, three LEDs flash blue.
• When fully charged, all 3 LEDs are on and solid blue.
• You can use continuously for 75 minutes.
If you notice a decrease in any of the vibration intensities, the unit
needs to be charged.
If the three battery indicators haven’t flashed after six hours of
continuous charging, unplug from power source to avoid danger.
CHARGING
PLUG
DC CHARGING
PORT
9
m
- ♦■■■
-,. __
DC 1r,,,i 5V 1A
t~ njoie
. .
.
"---f:l
/ t;J
a, njoie