Owner's Manual

BATTERY CHARGING
Before first use, the device should be charged completely. Connect the included power
supply cable to a USB supported charging device and the other end to the unit itself.
The approximate time for a full charge is 3 hours. The DC charging port for the built-in
rechargeable battery has 5V/1A input.
During charging:
• When the battery is below 30%, one LED flashes red.
• At 30-70%, two LEDs flash red. At 70-99%, three LEDs flash red.
• When fully charged, all 3 LEDs are on and solid red.
• You can use continuously for 75 minutes.
If you notice a decrease in any of the vibration intensities,
the unit needs to be charged.
If the three battery indicators haven’t flashed after six hours of
continuous charging, unplug from power source to avoid danger.
DC CHARGING
PORT
CHARGING
PLUG
9