Owner manual

Color Temperature Calibration in COLOR TEMP Sub-Menu:

NOTE: For accurate color calibration, we recommend using a hardware colorimeter

1) In the COLOR TEMP Sub-Menu, use the VOL+/VOL- button to select the “USER” preference and press

the MENU button.

2) Use the UP/DOWN button to select which color temperature to customize and press the MENU button to

highlight the progress bar.

3) Next, use the VOL+/VOL- to adjust the desired settings of the color’s temperature. Pressing the AUTO but-

ton will allow you to exist out of the color’s progress bar. You can next use the UP/DOWN button to go to the

next color and pressing the MENU button will allow you to access the color’s progress bar to adjust that color’s

temperature settings. is step may be needed to repeated several times on each color to obtain the desired color

temperature settings when you are using a hardware colorimeter.

4) Once you have adjusted your desired color temperature settings, pressing the AUTO twice will exit the OSD

and apply the settings.