Owners manual
7"
"
The included DisplayPort to DisplayPort cable is for connecting the NX-VUE24 for DisplayPort output
devices/hardware.
For Audio/Sound: With a DisplayPort connection, you can transmit audio from your computer to the NX-
VUE24A/B monitor by adjusting your operating system's audio playback settings. If you are using a DVI or
VGA connection, you will need to use the included 3.5mm AUX cable and configure your operating system's
audio playback settings.
NOTE: Do not use cable/adpater converters to connect the NX-VUE24 to HDMI, DVI, or VGA output
hardware/devices. We cannot guarantee these adapters will work with the NX-VUE24. To enable AMD
FreeSync™ Technology - a direct DisplayPort only cable connection to your computer is required.
NX-VUE24 Power Cable and Power Supply Switch:
Only use the power cable included with the NX-VUE24. Using any other un-authorized power adapters may
damage your monitor and void your warranty. Connect the power cable to internal power supply on the back of
the monitor.
NX-VUE24A - Monitor Swivel Left/Right:
Make sure the NX-VUE24 is on a stable level surface. Holding the base shaft with your hand, carefully twist
the monitor shaft left or right to desired orientation.