Owners manual

38"
"
SETUP - AUDIO INPUT
The NX-VUE24 allows you to choose your preferred audio input for the monitor's internal speakers. These are
the recommended OSD setting for AUDIO input depends on the connection you are using:
DIGITAL = when using a DisplayPort or HDMI connection.
ANALOG = when using the 3.5mm AUX audio cable with a DVI or VGA connection
a) In the SETUP sub-menu, use the arrow buttons [ ] or [ ] to navigate to AUDIO INPUT. Make sure
selection is highlighted (see picture) and press [ ] to confirm selection.
b) Use the arrow buttons [ ] or [ ] to navigate to the preferred either the DIGITAL or ANALOG for your
audio input preference and type. Make sure selection is highlighted (see picture) and press [ ] to confirm
selection.
c) Press [ ] once to confirm preferred settings and exit to the SETUP sub-menu to begin the next adjustment
or to completely exit out of the On Screen Display by pressing [ ] again.