Owners manual

37"
"
SETUP - VOLUME
The VOLUME feature in the SETUP sub-menu configures the audio volume for the monitors internal speakers.
To use the monitor's internal speaker, you must use either an HDMI connection or DisplayPort connection -
both connection types can transmit audio to the monitor. When using a DVI connection, you must use the
included 3.5mm AUX audio cable to connect to the 3.5mm audio input of the monitor (DVI does not transmit
audio to the monitor by itself). Make sure the audio playback is configured properly in your computer's
operating system. Also -see SETUP - AUDIO INPUT on the next page for type of connection used for the
monitor's speaker feature.
a) In the SETUP sub-menu, use the arrow buttons [ ] or [ ] to navigate to VOLUME. Make sure selection
is highlighted (see picture) and press [ ] to confirm selection.
b) Use the arrow buttons [ ] or [ ] to configured to the preferred speaker volume output from "0" to "100."
c) Press [ ] once to confirm preferred settings and exit to the SETUP sub-menu to begin the next adjustment
or to completely exit out of the On Screen Display by pressing [ ] again.