Owners manual

36"
"
SETUP - RESET
The RESET feature in the SETUP sub-menu will allow you to reset all On Screen Display (OSD)
configurations or changes you have made - back to the monitors default settings.
a) In the SETUP sub-menu, use the arrow buttons [ ] or [ ] to navigate to RESET. Make sure selection is
highlighted (see picture) and press [ ] to confirm selection.
b) Use the arrow buttons [ ] or [ ] to navigate to the preferred either the NO or YES to reset all changes
made to the OSD configurations to default. Make sure selection is highlighted (see picture) and press [ ] to
confirm selection.
c) Press [ ] once to confirm preferred settings and exit to the SETUP sub-menu to begin the next adjustment
or to completely exit out of the On Screen Display by pressing [ ] again.