Owners manual
29"
"
OSD SETTINGS (Sub-Menu) - VERTICAL
The VERTICAL feature allows you to set the OSD MENU (On Screen Display Menu) to either towards the top
or bottom of your monitor.
a) Make sure the VERTICAL selection is highlighted in red (see picture) and press [ ] to confirm selection.
b) Use the arrow buttons [ ] or [ ] to adjust between 0 to 100 for the VERTICAL placement of the OSD
MENU towards the TOP or BOTTOM of the display.
c) Press [ ] once to confirm selection and exit to the OSD SETTINGS sub-menu to begin the next adjustment
or to completely exit out of the On Screen Display press [ ] again.