Owners manual

14"
"
7) Make sure you see the check mark in the box "Enable" in the AMD FreeSync™ technology (or DP
Adaptive-Sync) section. Last, click on "Apply" to enable AMD FreeSync™ technology. For reference, see
picture below:
NOTE: Once you enable FreeSync™ in the AMD Catalyst Control Center you do not have to go through this
process again (unless you want to disable FreeSync™). If you disconnect the NX-VUE24 via DisplayPort cable
from the computer, you may have to go through this process again to enable FreeSync™. The Adaptive-Sync
(FreeSync) range is 30Hz to 144Hz. If you need additional assistance, please contact us toll free at 888-983-
4128 or e-mail techsupport@nixeus.com