Instructions / Assembly
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
Read all instructions before using.
DANGER:To reduce the risk of electric shock:
1.Always unplug this furnishing from the electrical outlet before cleaning.
WARNING:To reduce the risk of burns, re, electric shock, or inju to persons.
1.Unplug from outlet before putting on or taking o pas.
2.Close supeision is necessa when this furnishing is used by, or near children, invalids,or
disabled persons.
3.Use this furnishing only for its intended use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
4.Never operate this furnishing if it has a damaged cord or plug, if it is not working properly, if
ithas been dropped or damaged, or dropped into water. Return the furnishing to a seice
centeor examination and repair.
5.Keep the cord away from heated suaces.
6.Never operate the furnishing with the air openings blocked. Keep the air openings free of lint,
hair, and the like.
7.Never drop or inse any object into any opening.
8.Do not use outdoors.
9.Do not operate where aerosol (spray) products are being used or where oxygen is
being administered.
10.To disconnect, turn all controls to the o position, then remove plug from outlet.
11.WARNING:
Risk of lnju - Keep children away from extended foot suppo (or other
similar pas).
12.WARNING:Risk of Electric Shock - Connect this furnishing to a properly grounded
outlet only. See Grounding Instructions.
13.For loading always put heavier items at the bottom and not near the top in order to help
prevent the possibility of the furnishing tipping over.
14.WARNING:To prevent the risk of inju to individuals, do not position video equipment, such
as televisions or computer monitors, on this product.
15.WARNING:Inju Risk to Individuals - Do not use this piece of furniture to suppo video
equipment such as televisions or computer monitors.
This product must be connected to a grounded metal, permanent wiring system, or
anequipment-grounding conductor must be run with the circuit conductors and connected to
theequipment-grounding terminal or lead on the product.
SAVE THESE INSTRUCTIONS GROUNDING INSTRUCTIONS
1