Owner manual
12. Now to complete the installation reinstall the
bottle, and plug the weather pack connectors
together. Turn the vehicle on and press the close
side of the opener control switch for 2 seconds
and the opener should completely close the bottle
valve. Slowly remove the D-4 cap on the bottle
nipple. A small amount of nitrous will escape, if
the valve is leaking reinstall the cap and cycle the
opener open and closed and recheck for leaks. If
the opener does not completely close the valve a
clutch adjustment may be necessary. See the illus-
trations below for proper clutch adjustment. After
the valve has been veried not to leak reinstall the
supply line. The installation is now complete and
the remote opener is ready to use.