Instruction Manual

Attach the 180 tting to the rail. Do not use thread sealer
on this tting. Figure 7
Now thread the supplied Aeroquip 180’ tting onto the d-6
x 1/4 tting that was just previously installed. (Figure 6)
Thread sealer is also not needed with this tting.
Using the supplied mounting clamp (Figure 8) install
the accumulator in a convenient location. The black line
should be routed away from any hot surfaces or engine
exhaust pipes. Be certain that no lines are kinked or
restricted.
Figure 6
Figure 7
Figure 8
There are multiple mounting locations available for this application. In the rst image we show the
Accumulator mounted on the drivers side next to the brake booster. In the second picture it is mounted
on the passenger side fenderwell. For a more discreet location, you may also mount it on the passenger
side next to your PCM.
Nitrous Express, Inc. • 5411 Seymour Hwy • Wichita Falls, TX 76310