User's Manual

Wiegand

It decides whether to use Wiegand communication protocol to send

authentication results and user ID to a server.

Function Mode (Time and Attendance mode)

Time and attendance mode, the user must press a function key and

perform the user authentication process when opening the door. The

entry logs will be sent with the function key data to the server

management program.

Depending on the function key, user attendance records can be

classified into “Coming to work”, “Leaving work”, “Going out”, and

“Returning” for efficient attendance management.

Auth Mode

NL : Network mode. In this mode, the terminal connects to Access

Server Professional

via TCP/IP network.

SO : Standalone mode. The terminal works standalone without

Access Server Professional

Time Setting

You can set current time. Current

Terminal Mode (wiegand output)

You can choose the way of the wiegand output.

When ‘Reader’ is selected, wiegand output will be the RF card

number. When ‘Terminal’ is selected, wiegand output will be Facility

code and User ID.