Manualshelf

User's Manual

ManualsBrandsNITGen ManualsComputers & AccessoriesFINGERPRINT RECOGNITION MOUSE
29303132333435363738
34
USB FRD Problems
<When the USB FRD doesn’t work >
1. Verify that the USB connector of FRD is connected to the USB port correctly.
2. Click
Start-Setting-Control Panel-System
icon and select the ‘
Device Manager
’ tab
to verify that the Fingkey Mouse driver is installed correctly. If it is not installed
correctly as shown below, repeat the installation process and be sure to select the USB
Fingkey Mouse.
3. If you are using the FRD connected to a USB port in a USB keyboard or Hub, verify
that the USB keyboard or Hub has it’s own power-supply. The USB FRD uses almost
110mA of electric power, so it should only be connected to hubs that are self-powered.