User's Manual

30
General
1. Option values used in eNBSP SDK are
set up. The values are applied to other
tabs. If “Init” is not selected on the
Device tab, Brightness and Contrast
are set at “0”, which cannot be
changed.
2. The pictures left shows images of a
fingerprint with two different
Brightness values. If a fingerprint is
too dry or too wet, change Brightness
and Contrast to get an optimal image.
3. The maximum number of fingerprint
that can be input is 10 as a default. If it
is changed to “1”, only one fingerprint
is allowed to be registered from the
Enroll tab. The Security Level is
important, determining success or
failure of verification on the Verify tab.
Click “Default” to initialize.