User's Manual

26
Verify
1. User information input from the
Enroll tab is displayed on the list.
Using this user information,
verification is performed. There are
two types of authentication:
Verification(1:1) and
Identification(1:N).
2. Select “Identification” and then click
“Match” to perform verification. If
there is a fingerprint that matches,
related information is displayed.
3. Or select a user ID and a fingerprint
ID to attempt verification. Choose
“1000-6” as a fingerprint but use the
fingerprint input as “1001-7”. Then
attempt to match both. The system
displays the result by comparing the
two.