User's Manual

22
Device
1. Select a device you wish to use and then
initialize.
2. Click “Device Scan” to display the list of
all devices in the system.
3. Choose a certain device from the list and
click “Init” to initialize the device, which
makes it possible to capture or use other
functionalities of the tab. Without
initialization, other functionalities of the
tab cannot be used.
4. Click “Init” to output device information.
5. Click “Save” or right-click on the image
to save the fingerprint image as BMP. If
the fingerprint is not input, the image will
not be saved.