Instruction Manual

Page | 1
Needed for
Operation
 6 AA 1.5V Alkaline Batteries
 SD or SDHC Card (2GB - 32GB)
SPECIAL HANDLING PRECAUTIONS
CAMERA:
o The camera has been finely tuned. Avoid dropping and physical shock.
o The camera is designed for typical weather conditions (IP66). It is not waterproof for
use underwater.
o Recommended Operating Temperature: -15°C …. +40°C
o Carefully clean debris from camera lens, PIR, and LED platform. Avoid use of
cleaning solvents.
o The camera contains precise electronic equipment. Do not attempt to open camera
case yourself.
o Condensation may form on lens and electrical components when bringing into warm
room from cold. To avoid this, first place camera inside a sealed plastic bag before
bringing into warm room temperature. If condensation forms, remove SD card and
batteries until camera is dry.
o Remove batteries when storing camera. Removing batteries from the camera during
storage reduces the risk of battery acid leakage and battery drain.
o Do not mix old and new batteries together in the camera.
MOUNTING OF THE CAMERA:
This camera is designed to use the Mounting strap (included) to obtain maximal mounting
versatility. Camera can be securely locked with cable lock (sold separately). It is recommended
to mount the camera 1m height pointing to desired area and 7m away from target area for
maximum sensitivity in most situations. Adjustments may be required depending on animal size
and environment. PIR motion detection distance changes based on ambient temperature and
setup. Higher ambient temperatures will reduce PIR motion detection range thereby requiring
camera to be closer to desired location. Mounting camera too high or tilting camera may result in
animal or humans going under or above the PIR motion detection range. Angle the camera
perpendicular to the ground to maximize the IR lighting potential.