SDS

Rechargeable Li-ion Battery ICR10440 320mAh 3.7V
Safety Data Sheet
This document has been prepared in accordance with the SDS requirem ents of the OSHA Hazard Com munication Standard 29 CFR 1910.1200
03/03/2020 EN (English US) 3/10
circumstances.
Toxic vapor may release in case of fire.
:
Thermal decomposition can lead to release of irritating and toxic gases and vapors
5.3. Special protective e quipment and precautions for fire-fighters
Protection during firefighting
:
Do not attempt to take action w ithout suitable protective equipment. Self-contained breathing
apparatus. Complete protective clothing.
Other information
:
Evacuate personnel to a safe area. Ensure adequate ventilation, especially in conf ined areas.
Eliminate every possible source of ignition. Move containers from fire area if it can be done
w ithout personal risk. Cool tanks/drums w ith w ater spray/remove them into safety. Stay
upw ind/keep distance from source.
SECTION 6: Accidental release measures
6.1. Personal precautions, pr otective equipment and e mergency procedures
6.1.1. For non-emergency personnel
Emergency procedures
:
No open flames, no sparks, and no smoking. Avoid contact w ith skin, eyes and clothing. Do not
breathe dust/fume/gas/mist/vapors/spray.
6.1.2. For em e rgency responders
Protective equipment
:
Do not attempt to take action w ithout suitable protective equipment. For f urther information
refer to section 8: "Exposure controls/personal protection".
Emergency procedures
:
Stop leak if safe to do so. Evacuate personnel to a safe area. Ensure adequate ventilation,
especially in confined areas.
6.2. Environmental precautions
Avoid release to the environment.
6.3. Methods and material for containment and cleaning up
For containment
:
Collect spillage. Move containers from fire area if it can be done w ithout personal risk. Contain
large spillage w ith sand or earth.
Methods for cleaning up
:
Take up liquid spill into absorbent material. Clean up any spills as soon as possible, using an
absorbent material to collect it. Notify authorities if product enters sew ers or public w aters.
Other information
:
Dispose of materials or solid residues at an authorized site.
6.4. Reference to other sections
For further information refer to section 13.
SECTION 7: Handling and storage
7.1. Precautions for s afe handling
Precautions for safe handling
:
When packing the batteries, do not allow battery terminals to contact each other, or contact
w ith other metals.
Be sure to pack batteries by providing partitions in the packaging box, or in a separate plastic
bag so that the single batteries are not mixed together.
Use strong material for packaging boxes so that they w ill not be damaged by vibration, impact,
dropping and stacking during their transportation.
Do not short-circuit, recharge, deform, throw into fire or disassemble.
Do not mix different type of batteries.
Do not solder directly onto batteries.
Insert the battery correctly in electrical equipment.
Hygiene measures
:
Wash contaminated clothing before reuse. Do not eat, drink or smoke w hen using this product.
Always wash hands after handling the product.
7.2. Conditions for safe s torage, including any incompatibilities
Storage conditions
:
Store in a cool and dry area, but prevent condensation on cell or battery terminals.
High temperature may damage the performance of the battery.
Protect f rom physical damage and short circuits.
To avoid risk of fire or explosion, keep sparks and other sources of ignition aw ay from the
battery.
Do not allow metal objects to simultaneously contact both positive and negative terminal of
batteries.
Do not stack battery directly on another battery.
Do not store batteries on electrically conductive surfaces.
Keep containers tightly closed in a dry, cool and w ell-ventilated place