SDS

1200054 - Li-Mn Button Cell CR927

Revision Date 20-Jan-2015

____________________________________________________________________________________________

Page 5 / 12

6. ACCIDENTAL RELEASE MEASURES

Personal precautions, protective equipment and emergency procedures

Personal Precautions

In case of rupture: Avoid contact with skin, eyes or clothing. Ensure adequate ventilation.

Use personal protective equipment as required. Avoid generation of dust. Do not breathe

dust. Evacuate personnel to safe areas.

Other Information

Refer to protective measures listed in Sections 7 and 8.

Environmental Precautions

Refer to protective measures listed in Sections 7 and 8. Prevent further leakage or spillage

if safe to do so.

Methods and material for containment and cleaning up

Methods for Containment

Prevent further leakage or spillage if safe to do so.

Methods for cleaning up

Pick up and transfer to properly labeled containers.

7. HANDLING AND STORAGE

Precautions for safe handling

Handling In case of rupture: Handle in accordance with good industrial hygiene and safety practice.

void contact with skin, eyes or clothing. Do not eat, drink or smoke when using this

product. Take off contaminated clothing and wash before reuse. Do not breathe dust. Avoid

generation of dust. Ensure adequate ventilation. In case of insufficient ventilation, wear

suitable respiratory equipment.

Conditions for safe storage, including any incompatibilities

Storage

Keep containers tightly closed in a dry, cool and well-ventilated place. Keep out of the reach

of children.

Incompatible Products

Strong acids. Strong oxidizing agents. Strong bases.

8. EXPOSURE CONTROLS/PERSONAL PROTECTION

Control parameters

Exposure Guidelines

Chemical Name ACGIH TLV OSHA PEL NIOSH IDLH

Manganese dioxide

1313-13-9

TWA: 0.02 mg/m

TWA: 0.1 mg/m

(vacated) Ceiling: 5 mg/m

Ceiling: 5 mg/m

IDLH: 500 mg/m

TWA: 1 mg/m

STEL: 3 mg/m