Quick Reference Guide

first drive features

LI-ION BATTERY CHARGING

NOTE: Before charging the Li-ion battery, refer to your Owner’s Manual for detailed warnings and

cautions when charging your battery.

There are three methods available to perform the charge operation; normal charge, trickle

charge and quick charge (if so equipped).

NORMAL CHARGE

Perform a normal charge using the charger installed

in your home.

It takes approximately 7 hours to charge the Li-ion

battery from empty to full.

To charge your vehicle:

• Turn the power switch off.

• Pull the charge port lid opener handle located below the instrument panel to the left of

the steering wheel.

• Press the charge port tab and open the cap.

• Connect the charge connector

to the charge port

. When connected correctly, a

beep will sound once.

To stop charging:

• Press the button

on the charge connector to release the lock and remove the charge

connector from the charge port.

• Close the charge port cap and the charge port lid.

TRICKLE CHARGE

Perform a trickle charge by connecting the Electric

Vehicle Supply Equipment (EVSE) supplied with your

vehicle to a dedicated 110-120 volt, 20A power outlet.

It takes approximately 21 hours to charge the Li-ion

battery from empty to full.

To charge your vehicle:

• Turn the power switch off.

• Pull the charge port lid opener handle located below

the instrument panel to the left of the steering wheel.

• Press the charge port tab and open the cap.

• Connect the EVSE plug

to a dedicated 110-120 volt, 20A power

outlet. The EVSE control box’s green indicator light

will illuminate.

• Connect the charge connector

to the charge port

. A beep will sound once.