Owner's Manual

Black plate (244,1)
Model "R35-N" EDITED: 2009/ 10/ 30
Example 1: Switching map to 2D
(Plan View) mode
1. Push < > located on the steering wheel.
2. The system annou nces, “Please say a
command”.
3. After the tone sounds and the icon on the
screen changes from [
]to[ ], speak
“Plan View Map”.
4. Voice feedback will be provided when the
comm and is accepted, and the map is
displayed in 2D (Plan View).
Example 2: Setting destination
using places list
1. Push < > located on the steering wheel.
2. The system annou nces, “Please say a
command”.
3. After the tone sounds and the icon on the
screen changes from [
]to[ ], speak
“Places”.
4. If a r oute is already set, choose “N ear
Current Location”, “Along Route” or “Near
Destination”.
5. After the tone sounds and the icon on the
screen changes again, speak “Along Route”.
6. Voice feedback will be provided when the
command is accepted, and the list of places
of interest categories appears.
7. After the tone sounds and the icon on the
screen changes again, speak “Two”.
8-26 Voice recognition