Black plate (3,1) FOREWORD NISSAN NAVIGATION SYSTEM HELPDESK CONTACT INFORMATION NISSAN CONSUMER AFFAIRS DEPARTMENT For assistance or inquiries about the NISSAN Navigation System, or to order updated map data, contact the NISSAN NAVIGATION SYSTEM HELPDESK at: For assistance or inquiries about the NISSAN warranty, service or general questions, contact the NISSAN Consumer Affairs Department at: . ADDRESS: P .O. Box 1588, Orem, UT 84059-992 . E-MAIL: Nissan-Navi-Info@navteq.com . WEB SITE: www.
Black plate (1,1) Table of Contents Introduction 1 Getting started 2 Map settings 3 Setting destination 4 Route guidance 5 Storing location/route 6 Viewing technical information 7 Other settings 8 Voice recognition 9 General system information 10 Troubleshooting guide 11 Index 12 Model "08NJ-N" Edited: 2010/ 5/ 14
Black plate (1,1) 1 Introduction How to use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 For safe operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Reference symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-3 Laser product. . . . . . . . . . . . . . . .
Black plate (4,1) HOW TO USE THIS MANUAL This manual uses special words, symbols and icons that are organized by function. Please refer to the following items to understand how to use this manual properly. FOR SAFE OPERATION WARNING Indicates the presence of a hazard that could cause death or serious personal injury. To avoid or reduce the risk, the procedures must be followed precisely. NOTE: Indicates items that help you understand and maximize the performance of your vehicle.
Black plate (5,1) SAFETY INFORMATION This system is primarily designed to help you reach your destination, and it also performs other functions as outlined in this manual. However, you, the driver, must use the system safely and properly. Information concerning road conditions, traffic signs and the availability of services may not always be up to date. The system is not a substitute for safe, proper and legal driving. Before using the navigation system, please read the following safety information.
Black plate (6,1) LASER PRODUCT This navigation system is certified as a Class 1 laser product. The navigation system complies with DHHS Rules 21 CFR Chapter 1, Subchapter J. WARNING . Do not disassemble or modify this system. There are no user serviceable parts in this navigation system. . If maintenance, adjustments and operations other than those specified in this manual are attempted, injury due to laser radiation and exposure could occur.
Black plate (4,1) 2 Getting started Control buttons and functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Control panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-2 Multi-function controller . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Steering wheel switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Starting the system. . . . . . . . . . . . . . . . . . . . . . .
Black plate (10,1) CONTROL BUTTONS AND FUNCTIONS 9 : * Push to return to the previous screen. In a settings screen, this button can also be used to apply the setting. In a character input screen, this button can also delete the characters that have been entered. 10
Black plate (11,1) MULTI-FUNCTION CONTROLLER 4 Center dial: * Turn to highlight an item on the screen or adjust a setting. Turn the center dial on the map screen. The map scale is displayed. Use the center dial to adjust the map scale. STEERING WHEEL SWITCH “START MENU” (page 2-7) If this button is tilted up while the audio function is activated and the map or status screen is displayed, the audio system can be operated. 2 <+ * −>: Use to adjust the volume.
Black plate (12,1) STARTING THE SYSTEM The navigation system starts when the ignition switch is turned to the ACC or ON position. NOTE: Do not keep the navigation system on with the engine stopped. Doing so may discharge the vehicle battery. When you use the navigation system, always keep the engine running. NAVIGATION SYSTEM STATUS SCREEN By pushing at anytime, you can display a split screen with audio information that is always at the top.
Black plate (13,1) FUNCTIONS DISABLED WHILE DRIVING To ensure safe driving, some functions cannot be operated or have limited operation while driving. Park the vehicle in a safe location and then operate the navigation system.
Black plate (14,1) MENU SCREEN AND HOW TO OPERATE INFO: An item can also be selected by tilting on the steering wheel up and down. MENU SCREENS AND THEIR PURPOSES Push , , , or to display the corresponding menu screen. How to select a menu item Example: screen 2. To select the preferred menu item, highlight the item and push . The next screen is displayed. 3. Push to return to the previous screen without applying any changes.
Black plate (15,1) INFO: . The volume of phone and voice guidance, the display brightness, etc. can be adjusted by tilting on the steering wheel up and down. . These same adjustments can also be performed using the touch panel operation. “Adjusting volume and others” (page 2-9) START MENU The start menu can be displayed using the steering wheel switch. USING CONTROLS TO ADJUST VALUES, LEVELS, ETC.
Black plate (16,1) INFO: on the steering wheel switch can be used to display the start menu only when the map or status screen is displayed. Available items . [Destination]: Displays the destination screen. It is the same screen that appears when is pushed. “4. Setting destination” . [Route]: Displays the route screen. It is the same screen that appears when is pushed. “5. Route guidance” . [Info]: Displays the information screen.
Black plate (17,1) TOUCH PANEL OPERATION 5 An item that starts with the selected letter * will be displayed at the top of the list. 6 Highlight * and push to sort the list in the original order. 7 When * the list is sorted by the shortest distance, the selected location can be confirmed in the preview on the right side of the screen. 8 Highlight * and push to modify search conditions.
Black plate (18,1) HOW TO INPUT LETTERS AND NUMBERS Inputting letters and numbers CHARACTER (letters and numbers) INPUT SCREEN is entered. When setting a destination, searching for a facility or editing the stored locations, etc. alphanumeric characters must be entered into the system. 1. Touch the letter or number. 2. To delete a character, touch [Delete]. Push and hold [Delete] to delete all of the characters. 1.
Black plate (19,1) INFO: . . . Push on the control panel to return to the previous screen, but only after deleting all the characters entered. When [BACK] is touched on the screen, the screen returns to the previous screen even when characters have been entered. When text has been entered and the number of matching list items has been narrowed down enough so that they fit on the screen, the list screen appears automatically.
Black plate (20,1) MAP MENU SCREEN 4. After finishing the entry, highlight [List] and push . Push while the current location map screen or a scrolled map screen is displayed to display the menu corresponding to that screen. This menu can be used to access helpful functions quickly, such as setting a destination and searching for points of interest nearby. To select a menu item, use the method described earlier in this manual. “MENU SCREEN AND HOW TO OPERATE” (page 2-6) INFO: INFO: .
Black plate (21,1) . [Map View]: Perform map operations such as the switching of map type and the setting of map orientation and scale. “Map settings” (page 3-1) . [Map Icons]: Select map icons of certain points of interest (such as restaurants and gas stations, etc.) to be displayed on the map around the current vehicle location. “DISPLAYING MAP ICONS” (page 318) . [Store Tracking]: Store in the Address Book the route travelled from the starting point to the current location.
Black plate (22,1) STORING HOME LOCATION/ ADDRESS HOW TO STORE HOME LOCATION If a home location is already stored in the Address Book, it can be easily retrieved to set the route to the stored home location. The procedure to store the home location is the same as for storing any other location. “4. Setting destination” As an example, the procedure for storing the home location by searching for a destination by address is described here. 3. A confirmation message is displayed.
Black plate (23,1) SETTING DESTINATION INFO: The same setting can also be performed by pushing and highlighting [Navigation]. “STORING LOCATION BY SEARCHING” (page 6-2) SEARCHING FOR DESTINATION As an example, the method for setting a restaurant as the destination using [Places] is described here. 8. A message is displayed and the home location is stored. 1. Push . 2. Highlight [Places] and push . 9. Highlight [OK] and push . 10.
Black plate (24,1) INFO: The search can also be narrowed down by selecting [All Categories or Name] or [ZAGAT] on this screen. By selecting [All Categories or Name], the area, name of facility, etc. can be specified. By selecting [ZAGAT], restaurants registered in the ZAGAT database can be searched and sorted by its rating regarding food, decor, cost, service, etc. the top of list to display all nearby places. 5. The entire route is shown on the map.
Black plate (25,1) CANCELING ROUTE Delete a route that is already set according to the following procedure. 3. When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen. Push
Black plate (26,1) OPERATING MAPS screen. * Suggested route: 6 Appears in bold yellow during route guidance. 7 * 8 * HOW TO VIEW MAP SCREEN The navigation system displays various information on the map screen. 3 * 4 * Screen information 1 * 2 * Vehicle icon: Indicates the current vehicle location and the direction of travel. Starting point: Displays the vehicle location, with which the route is set, as the starting point. 5 * Guide point: Indicates a guide point on the route.
Black plate (27,1) SETTING VOICE GUIDANCE TURNING VOICE GUIDANCE ON/OFF Other settings Voice guidance can be activated or deactivated. Voice guidance can also be activated or deactivated using the following procedure. 1. Push . 2. Highlight [Guidance Settings] and push . 3. Highlight [Guidance Voice] and push . The indicator illuminates if voice guidance is activated. 1) Push . 2) Highlight [Volume & Beeps] and push .
Black plate (28,1) NISSAN VOICE RECOGNITION 4) Adjust the voice guidance volume by using the center dial or main directional buttons. INFO: 4. Adjust the voice guidance volume by using the center dial or main directional buttons. Other settings Voice guidance volume can also be adjusted using the following procedure. 1) Push . 2) Highlight [Volume & Beeps] and push . 3) Highlight [Guidance Volume] and push .
Black plate (29,1) dard Mode be used for the best recognition performance. INFO: . For voice recognition system operation related to the phone, audio or vehicle information systems, refer to the Owner’s Manual of your vehicle. . When the system language is set to “Français” (French) or “Español” (Spanish), the available commands and functions may differ from those that are available when using the system in English.
Black plate (30,1) Navigation, Information, Audio or Help?”. 3. After the tone sounds and the icon on the ] to [ ], speak screen changes from [ a command. . To adjust the volume of the system feedback, push the volume control buttons <+> or <−> on the steering wheel switch or use the audio system volume control knob while the system is making an announcement. 4. Continue to follow the voice menu prompts and speak after the tone sounds until operation is completed. Operating tips .
Black plate (31,1) COMMAND LIST Category Command Command Action Phone Operates Phone function. Navigation Operates Navigation function. Information Displays Vehicle Information function. Audio Operates Audio function. Displays User Guide. Help Navigation Command Command Action Home Sets a route to the home location that is stored in the Address book. Address Searches for a location by the street address specified, and sets a route (for continental U.S. and Canada only).
Black plate (32,1) Phone Command Command Action Dial Number Makes a call to a spoken phone number up to 10 digits. Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook. Handset Phonebook Call History Makes a call to a phone number stored in a mobile phone. Incoming Calls Makes a call to an incoming call number. Outgoing Calls Makes a call to a dialed number. Missed Calls Makes a call to a missed calls number.
Black plate (33,1) Audio Command Command Action AM Turns to the AM band, selecting the station last played. FM Turns to the FM band, selecting the station last played. XM Turns to the XM Satellite band, selecting the channel last played. Music Box Turns on the “Music Box” hard disk drive audio system. Starts to play a CD.
Black plate (34,1) Voice command examples To use the voice recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations that are performed by voice commands are described here. Example 1: Setting a destination by a street address: 1. Push
Black plate (35,1) INFO: If the house number is unknown, speak “No house number”. 9. Speak the name of the street, “South Figueroa street”. INFO: Only the official street names stored in the map database can be recognized by the system. To improve accuracy, speak the street name precisely and include Boulevard, Way, North, South, etc., if known. If unsure of the full name, speaking only part of the street name such as “Figueroa” is acceptable, but recognition accuracy may be reduced. 10.
Black plate (36,1) Example 2: Placing a call to the phone number 800-662-6200: 1. Push located on the steering 5. Speak “800”. 7. The system announces, “Please say last four digits or say change number”. Speak “6200”. 6. The system announces, “Please say next three digits or dial, or say change number”. Speak “662”. 8. The system announces, “Dial or Change Number?”. Speak “Dial”. 2.
Black plate (37,1) . Do not add a “1” in front of the area code when speaking phone numbers. . If the system does not recognize a voice command, please try repeating the command using a natural voice. Speaking too slowly or too loudly may further decrease recognition performance. 9. The system makes a call to 800-662-6200. INFO: . Speaking “800-662-6200” (10 continuous digits) or “662-6200” (7 continuous digits) is acceptable, if the area code is not necessary.
Black plate (38,1) 6. Speak “Dial”. 7. The system makes a call to 011-81-111222-3333. INFO: Any digit input format is available in the International Number input process.
Black plate (7,1) 3 Map settings Map types . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 2D map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 BirdviewTM (3D) map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-3 Building graphics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (42,1) MAP TYPES Two types of map views are available: 2D and BirdviewTM (3D) map. 2D MAP 2D map displays the map in a 2-dimensional environment similar to a road map. Screen information 1 * 2 * 3 * 3-2 Vehicle icon: Indicates the current vehicle location and the direction of travel. Guide point: Indicates a guide point on the route. Remaining time and distance to the destination: Indicates the approximate remaining time and distance to the destination or waypoint.
Black plate (43,1) dance. * 5 6 * 7 * 8 * 9 * / Direction indicator: Indicates the directional setting of the map. Touch the icon to change the setting. : North always pointing up. : Traveling direction always pointing up. “SETTING MAP ORIENTATION” (page 315) Scale indicator: Indicates the scale of the map. Touch the icon to display the scale bar. This allows the map scale to be adjusted.
Black plate (44,1) DISPLAYING THE CURRENT VEHICLE LOCATION 3D building graphics (BirdviewTM map) INFO: In the area where the building graphics are not stored in the map data, the normal map is displayed even when the map is zoomed in. 3-4 OPERATING WITH CONTROL PANEL The basic map screen displays the current location (the position where the vehicle mark is located). Push
Black plate (45,1) MOVING A MAP OPERATING WITH TOUCH OPERATION After moving the map, touch [BACK] on the map screen to display the current location map screen. The operations for moving across the map are different between the 2D and BirdviewTM maps. 2D MAP Operating with the multi-function controller Push one of the main directional buttons or additional directional buttons. Hold down the button to move continuously across the map in that direction.
Black plate (46,1) Operating with touch operation INFO: While driving, scrolling on the map is limited to a specified distance. If the map screen is set to the building footprint graphics, the map cannot be scrolled while driving. Fine-adjusting the cursor position: 2. Touch the 8-directional key to adjust the cross pointer position. Touch [BACK] to end the adjustment. 1. Touch the screen. Displays the cross pointer, and the touched position is set as the center of the screen.
Black plate (47,1) Screen information: 1 Cross pointer * 2 Distance from * the vehicle position to the cross pointer 3 Street name * Operating with touch panel BIRDVIEWTM (3D) MAP Rotates the map clockwise. Operating with multi-function controller Rotates the map counterclockwise. The main directional buttons and additional directional buttons allow movement in the following ways.
Black plate (48,1) 2. Touch the direction to move to. The map continues to scroll while the screen is touched. 3. Touch [ ] or [ of the map. INFO: While driving, scrolling on the map is limited to a specified distance. ] to change the direction : Rotates the map clockwise. : Rotates the map counterclockwise.
Black plate (49,1) CHANGING THE SCALE OF A MAP OPERATING WITH THE BUTTONS ON CONTROL PANEL Push or . A scale appears on the right side of the screen. To view the map in detail, push . To view a wider area, push . The scale will automatically disappear when neither nor has been pushed for several seconds. If the scaling operation is not performed for a specified period of time, the scale display disappears.
Black plate (50,1) OPERATING WITH CENTER DIAL OPERATING WITH TOUCH OPERATION 1. Touch . Displays the scale. 1. Turn the center dial when the map screen is displayed. The map scale is displayed on the right side of the screen. 2. Use the center dial to adjust the map scale.
Black plate (51,1) INFO: Free zoom: Once the [Small Step Zoom by Dial] is set to ON in the setting screen, the scale can be changed in smaller steps, when [ZOOM IN] or [ZOOM OUT] is pushed and held, than when either button is briefly pushed. If briefly pushed, operation returns to normal. Scale level for 2D map and BirdviewTM map (3D) display US Units Voice command 1. Push located on the steering 2. After the tone sounds, speak a command.
Black plate (52,1) CHANGING MAP VIEW The map view can be changed between the 2D and BirdviewTM maps. The map can also be displayed in the split screen mode. Example: The widest level (BirdviewTM map) 2. Highlight [Map View] and push . INFO: The traffic information icons are not displayed on the map screen when the map scale is set to 32 miles (64 km) or higher. “Traffic information display and scale levels” (page 7-8) 1. Push while the current location map screen is displayed. 3.
Black plate (53,1) AVAILABLE VIEWS . [2D map]: Switches to the 2D map. . [BirdviewTM (3D)]: Switches to the BirdviewTM map. . [Split: 2D Map]: Changes to the split screen mode and both halves display maps in 2D. . [Split: BirdviewTM Map]: Changes to the split screen mode and the left half displays the map in 2D and the right half displays the map in BirdviewTM. OTHER SETTINGS The map view can also be set using the following procedure. Split: 2D Map 1) 2) 3) 4) INFO: .
Black plate (54,1) SETTING THE MAP VIEW . To display the BirdviewTM map: “Birdview map” (Alternate command mode) Other settings are also available for the map screen, such as changing the map direction, map color, BirdviewTM angle, etc. BASIC OPERATION 3. Highlight [Map Settings] and push . 1. Push while the current location map screen is displayed. 4. Highlight the preferred item and push . Available setting items 2. Highlight [Map View] and push . .
Black plate (55,1) . [Long Range]: Set the long range map view display ON/ OFF. “SETTINGS LONG RANGE MAP VIEW” (page 3-16) . [Map Color]: Change the map color. “SETTING MAP COLOR” (page 316) . [Birdview Angle]: Change the BirdviewTM angle. “CHANGING BirdviewTM ANGLE” (page 3-17) . [Left Split Map Settings]: Set the map settings for the left screen of the split map. “SETTING LEFT SCREEN DISPLAY” (page 3-18) . [Show all Freeway Exits on Route]/[Auto.
Black plate (56,1) To charge the map direction: “North Up” (Alternate command mode) “Heading Up” (Alternate command mode) SETTINGS LONG RANGE MAP VIEW The position of the vehicle icon can be changed to view a wider area in the traveling direction. If this function is activated, the vehicle icon is located slightly lower than the center of the screen. North Up Long Range Map View INFO: [Long Range] is displayed only when [Heading Up] is selected.
Black plate (57,1) CHANGING BirdviewTM ANGLE The BirdviewTM angle can be changed. This setting is available only in the BirdviewTM map or 2D/BirdviewTM split map. 2. Highlight the preferred map color and push . The indicator light of the selected color illuminates. Available map colors . [Warm]: Set warm colors for the map coloring. . [Cool]: Set cool colors for the map coloring. . [Traffic Emphasis]: Set light colors for the map coloring to emphasize the traffic information. 1.
Black plate (58,1) LOOKING AT INFORMATION ON THE MAP SETTING LEFT SCREEN DISPLAY When the split screen is displayed, the map settings of the left screen can be changed. 1. Highlight [Left Split Map Settings] and push . Available setting items . [Map Orientation]: The map direction can be selected as follows. — [North Up]: North is set at the top of the map. — [Heading Up]: The traveling direction is set at the top of the map. .
Black plate (59,1) be displayed on the map instead of the general map icons listed below. Map icons that can be displayed 3. Highlight the preferred icon and push . The icon display setting toggles between on and off each time is pushed. The indicator of the selected icon illuminates. INFO: The map icons are not displayed on the map screen when the map scale is set to 500 m (1/4 mile) or higher in the 2D map, or to 2 km (1 mile) or higher in BirdviewTM map. . Restaurant .
Black plate (60,1) 3. Highlight [Others] and push . 5. Highlight the preferred information item and push . The indicator of the selected information item illuminates. Available information items: . [Address Book Icons] . [Destination/Waypoint Icons] . [Latitude/Longitude Info.] 4. Highlight [Map Scrolling Information] and push . 6. Push
Black plate (61,1) MAP SYMBOLS This navigation system uses symbols to display facilities.
Black plate (62,1) ROAD COLOR TRAFFIC INFORMATION ON MAP The road types are differentiated by colors. Freeway: Red or Light Red (zoomed in) Main road: Brown or Dark Yellow Narrow street: Gray Road with incomplete map data: Dark green With a subscription to XM NavTraffic® service, traffic information is displayed.
Black plate (10,1) 4 Setting destination Destination screen. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Changing region . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3 Finding address . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-4 Finding place . . . . . . .
Black plate (64,1) DESTINATION SCREEN There are several methods available to set a destination. Understand the advantages of each method and select the best method for finding and setting a preferred destination. BASIC OPERATION 1. Push . 2. Highlight the preferred destination setting method and push . Available setting items . Street Address: Searches for a destination by address. . Places: Searches for a destination from various categories of businesses or locations. .
Black plate (65,1) CHANGING REGION When setting a destination, the location can be narrowed down by specifying the region or city. Specifying the region 1. Push . 2. Highlight [Change Region] and push . Available setting items: . . . . . . . . . . .
Black plate (66,1) . “FINDING ADDRESS” (page 4-4) Highlight [Last 5 Cities] and push to display 5 cities recently set as destinations. FINDING ADDRESS When the address of the destination is available, use this method to enter the address and then have the system calculate a route. A location near the preferred destination can also be searched for by entering the house number if the map data contains the relevant data. 3. Enter the name of the street.
Black plate (67,1) 5. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculating a route. Examples: Correct input – North Elm Street East Jefferson Boulevard Incorrect input – Elm Street East Jefferson FINDING PLACE INFO: 4. Highlight the correct street of the destination from the list and push .
Black plate (68,1) Finding nearby place 1. Push . 2. Highlight [Places] and push . categories that are frequently used. 4. Highlight the preferred destination from the list, and push . The position of the selected location is displayed in the preview on the right side of the screen. INFO: . . A maximum of 100 facilities can be displayed on the list screen. If the suggested route is already set, the system displays the facilities located along the route.
Black plate (69,1) Searching by other methods Other settings: The destination can also be set by pushing in the current or scrolled location map screen and selecting [Nearby Places]. 1. Push . 2. Highlight [Places] and push . > located on the steering 2. After the tone sounds, speak a command.
Black plate (70,1) INFO: If [Select a City] is highlighted and is pushed, a city name input screen is displayed. Specify the city to search for before narrowing down the categories. “Specifying city” (page 4-3) INFO: To select the category by directly inputting the category name, highlight [Category Search] and push . The category name input screen is displayed. 7. Enter the name of the destination facility and highlight [List], and then push . The facility list is displayed.
Black plate (71,1) INFO: . . INFO: The facility name can also be entered directly by highlighting [Choose Name] on the main category list screen and pushing . 8. Highlight the preferred destination from the list, and push . . By highlighting [Sort] and pushing , options can be sorted from [By Name] or [By Dist.]. When selecting [By Dist.], the position of the selected location is displayed in the preview on the right side of the screen.
Black plate (72,1) Searching for restaurant by ZAGAT 1. Push . 4. Highlight the preferred state and push . A list screen is displayed. 6. Highlight [RESTAURANT] and push . A list screen is displayed. 5. Highlight the preferred city and push . A list screen is displayed. 7. Highlight the preferred category and push . A list screen is displayed. 2. Highlight [Places] and push . 3. Highlight [ZAGAT] and push .
Black plate (73,1) . By highlighting [Ratings] and pushing , an explanation of the ZAGAT ratings can be displayed. C 2009 Zagat Survey, LLC. Zagat Survey is a * registered trademark of Zagat Survey, LLC SETTING HOME AS DESTINATION The home location can be set as the destination to which the system calculates a route. This function is especially useful when searching for a route to return to the home location. 8. Highlight the preferred sorting order and push . A list screen is displayed.
Black plate (74,1) the destination. To set the home location as the destination: “Navigation” “Home” (Standard mode) “Home” (Alternate command mode) INFO: If the home location is not stored yet, the system will automatically display a screen for storing it. “STORING LOCATION” (page 6-2) SEARCHING FROM ADDRESS BOOK A location stored in the Address Book can be set as the destination to which the system calculates a route.
Black plate (75,1) INFO: 1 Sort by Number: * The Address Book entries are displayed in ascending numerical order. 2 Sort by Name: * The Address Book entries are displayed in alphabetic order. 3 Sort by Icon: * By selecting a particular icon, a list that contains only the Address Book entries associated with that icon is displayed. 4 Sort by Group: * By selecting a particular group (family, friends, leisure, etc.), the selected group is displayed at the top of the list.
Black plate (76,1) tical order. To display the Previous Destinations list: “Navigation” “Previous Destinations” (Standard mode) “Previous Destinations” (Alternate command mode) SETTING PREVIOUS START POINT The start point of the previous route guidance can be set as the destination to which the system calculates a route. 4. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push .
Black plate (77,1) SETTING FROM STORED ROUTES INFO: Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc. “PROCEDURES AFTER SETTING DESTINATION” (page 5-2) A preferred route can be selected from the stored routes. Voice command 1. Push . The route to the destination is set. > located on the steering 2. After the tone sounds, speak a command.
Black plate (78,1) INFO: . Even after setting a destination, the location of the destination can be adjusted, the location can be stored, etc. “PROCEDURES AFTER SETTING DESTINATION” (page 5-2) . The stored route includes only locations (destination and waypoints) and route calculation conditions, not the route itself. Therefore, when the destination is set using a stored route, a different route may be suggested if the current vehicle location is different from the one when the route was stored.
Black plate (79,1) and the location is displayed, and the system starts calculating. SETTING FREEWAY ENTRANCE/EXIT The entrance or exit of a freeway can be set as the destination to which the system calculates a route. 4. Enter the name of the freeway. 7. The entire route is shown on the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculating a route. 5.
Black plate (80,1) INFO: Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc. “PROCEDURES AFTER SETTING DESTINATION” (page 5-2) SETTING INTERSECTION 7. Highlight [Entrance] or [Exit] and push . A list screen is displayed. INFO: An intersection of any two streets can be set as the destination to which the system calculates a route. By selecting [By Distance], the list can be sorted by the nearest distance. 8.
Black plate (81,1) 3. H i g h l i g h t [ I n t e r s e c t i o n ] a n d p u s h . A character input screen is displayed. 5. Highlight a street as the 1st street from the list and push . A character input screen is displayed. 7. Highlight a street as the 2nd street from the list and push . 4. Enter the name of the 1st street. After finishing the entry, highlight [List] and push . A list screen is displayed. 6. Enter the name of the 2nd street.
Black plate (82,1) INFO: Even after setting a destination, the location of the destination can be adjusted, the route can be stored, etc. “PROCEDURES AFTER SETTING DESTINATION” (page 5-2) SETTING CITY CENTER The system can calculate a route to the center of a city, without setting a specific location. 3. H i g h l i g h t [ C i t y C e n t e r ] a n d p u s h . A character input screen is displayed. 5. Highlight the preferred destination from the list and push .
Black plate (83,1) SETTING POINT ON MAP A location scrolled to on the map can be set as the destination to which the system calculates a route. 6. The selected destination is displayed at the center of the map. Highlight [Start] after confirming the location of the displayed destination, and push . The system sets the destination to the selected location and starts calculating a route. 2. Highlight [New Dest.] and push . INFO: 1.
Black plate (84,1) DELETE DESTINATION It is possible to delete a destination and all waypoints that have already been set. INFO: The deleted destination and waypoints are not able to be reactivated. Voice command 1. Push . > on the steering wheel. 2. After the tone sounds, speak a command. To delete a destination and all waypoints: “Delete Destination” (Alternate Command Mode) 2.
Black plate (13,1) 5 Route guidance Procedures after setting destination. . . . . . . . . . . . . . . . . . . . . . . . 5-2 Available items after setting destination . . . . . . . . . . . . . . . 5-2 Starting route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-2 Selecting route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-3 Confirming route . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (88,1) PROCEDURES AFTER SETTING DESTINATION After performing a route search, the route guidance can be started immediately. Also, it is possible to confirm or change a route. AVAILABLE ITEMS AFTER SETTING DESTINATION . [Start]: Starts route guidance to the selected destination. “STARTING ROUTE GUIDANCE” (page 5-2) . [More Routes]: Displays 3 alternative routes. “SELECTING ROUTE” (page 5-3) 5-2 . [Add/Route Info]: Displays the route information or add a destination or a waypoint.
Black plate (89,1) SELECTING ROUTE Available route conditions CONFIRMING ROUTE . [Short. Time] (purple): Prioritizes by the shortest time. . [Min. Freeway] (orange): Minimizes the use of freeways. . [Short. Dist.] (green): Prioritizes by the shortest distance. INFO: 1. Highlight [More Routes] and push . . When a route condition is selected, a preview is displayed on the right side of the screen. . The 3 routes may not always be different. 1. Highlight [Add/Route Info] and push . 2.
Black plate (90,1) Available information . [Turn List]: Displays the details of the suggested route. “Using turn list” (page 5-20) . [Preview]: The system will trace the planned route going forward or in reverse. “Using route preview” (page 5-20) . [Add Way Pt.]: Add a waypoint or a destination. “Adding destination or waypoint” (page 5-4) . [Store Route]: A calculated route can be stored. A maximum of 5 routes can be stored. Stored routes can be easily retrieved and set as the suggested route.
Black plate (91,1) STORING LOCATION destination becomes a waypoint. MOVING LOCATION OF DESTINATION A searched location can be stored in the Address Book. Then it can be easily retrieved and set as a destination (or waypoint). The location of the destination can be adjusted by moving the cross pointer across the map. 2. Adjust the location by moving the cross pointer across the map and push . The location of the destination is modified. 1. Highlight [Move Location] and push .
Black plate (92,1) ABOUT ROUTE GUIDANCE VIEWING INFORMATION ABOUT SEARCHED LOCATION Information (street address and phone number) about places stored in the map data can be displayed. 1. Select [Place Info] and push . INFO: . If [Call] is displayed on the right side of the screen, it is possible to call the location indicated. . The Bluetooth® Hands-Free Phone system is required to be active and the cellular phone must be connected to call the location indicated. .
Black plate (93,1) GUIDANCE SCREENS AND PREVIEW MODE Route guidance displays map screens and various information according to the situation. Example of voice guidance 1 “In * about one quarter mile (400 meters), right (left) turn.” “Right (left) turn ahead.” 2 “In * about one quarter mile (400 meters) freeway entrance on your right onto (road number and direction).” “Freeway entrance on your right onto (road number and direction).” 3 “In about one mile (1.6 kilometers), exit on * your right.
Black plate (94,1) Enlarged intersection view Junction guidance Turn list When approaching a guide point, the system automatically changes to the split screen and shows an enlarged view of the intersection in the left screen. After passing through the intersection, the system automatically returns to the full screen mode. To switch to the full screen mode while the enlarged intersection view is displayed, push
Black plate (95,1) GUIDANCE SCREEN SETTINGS Turn list: The guidance screen can be displayed at all times even when the vehicle is located away from the guide point. The screen to be displayed can be set. Split screen settings The display setting on the left-hand side screen shown during route guidance can be changed. 3. Highlight [View Settings] and push . 4. Highlight the preferred screen and push . The indicator of the selected screen illuminates. Intersection: 1.
Black plate (96,1) Fuel Economy: tance to entry reading indicates a sufficient amount of fuel remains, refuel the vehicle as soon as possible. Full map: The current fuel consumption rate, average fuel consumption rate, instantaneous fuel consumption rate and distance to empty can be displayed on the map screen. An enlarged intersection view is automatically displayed when the vehicle approaches the guide point. Push
Black plate (97,1) Showing freeway exit information: 4. Highlight [Show all Freeway Exits on Route] or [Auto. Show Turn List on Freeway] and push . The indicator illuminates when the item is set. 5. Push
Black plate (98,1) ROUTE SCREEN location map screen. WARNING Always stop the vehicle in a safe location before modifying the route conditions. Modifying the route conditions while driving may cause an accident. 3. Highlight the preferred facility for the waypoint and push . 4. The waypoint is set, and the route search is performed. “PROCEDURES AFTER SETTING DESTINATION” (page 5-2) During route guidance, the route conditions can be modified and the route information can be confirmed.
Black plate (99,1) . [Detour]: To detour from the suggested route, calculate a route detouring for a specified distance. “SETTING DETOUR ROUTE” (page 5-22) . [Traffic Detour]: Manually search for an alternative detour route taking the traffic information into consideration. “SEARCHING FOR DETOUR ROUTE TAKING TRAFFIC INFORMATION INTO CONSIDERATION” (page 5-23) . [Route Settings]: Change the route calculation conditions anywhere along the route.
Black plate (100,1) EDITING ROUTE 3. A confirmation message is displayed. Highlight [Yes] and push . The canceled route is reactivated. INFO: If a new route is set, the canceled route cannot be reactivated. Available setting items 1. Push . 2. Highlight [Edit/Add to Route] and push . 3. Highlight the preferred condition and push . 4. Push to return to the previous screen. Push
Black plate (101,1) 5 Current waypoint: * Change or delete the waypoint. “Editing/deleting destination or waypoint” (page 5-16) 6 Condition * Setting destination or waypoint Add a destination or waypoint to the route that is already set. A total of 6 destinations or waypoints can be set. for calculating a route to a waypoint: Change the conditions for calculating a route to a waypoint. “Changing route calculation conditions” (page 5-18) 4. Set a destination or waypoint.
Black plate (102,1) INFO: Even after setting a destination/waypoint, the destination/waypoint location can be adjusted, the route can be stored, etc. “Editing/deleting destination or waypoint” (page 5-16) and is pushed. Editing/deleting destination or waypoint The destination or waypoint that is already set can be modified or deleted. If a location is modified or deleted when a suggested route is already set, the prior suggested route will be recalculated accordingly. 4. Highlight [Move Dest.
Black plate (103,1) INFO: . If the destination is deleted, the final waypoint of the route becomes the destination. . When the map screen is touched, the same map screen as when [Move Dest.] is selected is displayed. 6. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The destination or waypoint is deleted from the route. Return to the [Edit Route] screen.
Black plate (104,1) Changing route calculation conditions Each section of the route between waypoints can have different route calculation conditions. After setting these conditions, the entire route can be recalculated. 6. A message is displayed and the order of the destination or waypoint is changed. 1. Push . 4. Highlight the preferred condition and push . Available conditions: : [Fastest Route] : [Minimize Freeway] : [Shortest Route] 2. Highlight [Edit/Add to Route] and push .
Black plate (105,1) CONFIRMING ROUTE When the suggested route is displayed after calculation, the route information can be confirmed or the suggested route simulated. 6. By highlighting [Calculate] and pushing , the system will recalculate the routes. After the route search is completed, the display will automatically return to the present location screen. INFO: . The recalculated route may not be the shortest route because the system prioritizes easy-to-drive roads for safety reasons. .
Black plate (106,1) Using turn list Using route preview Confirming route by simulation 1. Highlight [Turn List] and push . 1. Highlight [Preview] and push . 1. Highlight [Simulation] and push . 2. The information (e.g., intersections) can be confirmed on the route to the destination by scrolling the screen using the up and down switches of the main directional buttons or the center dial. 2. Highlight the preferred key and push .
Black plate (107,1) GUIDANCE SETTINGS RECALCULATING ROUTE Various guidance settings can be set. The route can be searched for again manually after changing the search condition. When the vehicle deviates from the suggested route, the route from the current location to the destination is automatically searched again. Re-searching route manually Available setting items Basic operation 1. Push . 2. Highlight [Guidance Settings] and push . 3. Highlight the preferred item and push . 4.
Black plate (108,1) route recalculation is performed. Setting Auto Reroute 3. A message is displayed, and the route is recalculated. 1. Push . 2. Highlight [Route Settings] and push . 4. Highlight [Auto Reroute] and push . The indicator for the selected condition illuminates. When the current location map screen or route setting screen is displayed, the system recalculates a route with the set conditions. “Basic operation” (page 5-25) SETTING DETOUR ROUTE 4.
Black plate (109,1) 1. Push . 2. Highlight [Detour] and push . SEARCHING FOR DETOUR ROUTE TAKING TRAFFIC INFORMATION INTO CONSIDERATION When a serious traffic event occurs on the route, or if the system finds a faster route, a detour alert will pop up automatically. If the automatic alert is missed, a detour can also be searched for manually. 3.
Black plate (110,1) action is provided, the detour route will be automatically cancelled. . The detour suggestion may be retrieved even after the message disappears by manually selecting [Traffic Detour]. The system will then search for the detour again and suggests a detour if one is available at that time. . Without a subscription to an XM NavTraffic® broadcast, it will not be possible to get a traffic detour or apply settings for traffic information related functions.
Black plate (111,1) conditions, and the current location map screen is displayed. Available conditions: Detailed route settings Detailed conditions can be set for the route calculation. . [Fastest Route]: Prioritizes by the fastest time. . [Minimize Freeway]: Minimizes the use of motorways. . [Shortest Route]: Prioritizes by the shortest route. INFO: Only one of these conditions can be utilized at a time. Voice command 1. Push located on the steering 2.
Black plate (112,1) INFO: . The recalculated route may not be the shortest route because the system prioritizes easy-to-drive roads for safety reasons. . If route conditions are set from [Route Settings], all sections in the route are subject to the same route conditions even though different route conditions are set for different sections in [Edit/Add to Route]. .
Black plate (113,1) ROUTE GUIDANCE SETTINGS Various guidance information can be set to be played during route guidance and activate or deactivate route and/or voice guidance. Available setting items BASIC OPERATION 1. Push . 2. Highlight [Navigation] and push . 3. Highlight [Guidance Settings] and push . 4. Highlight the preferred item and push . 5. Push to return to the previous screen. Push
Black plate (114,1) . [Turning Point]: Turns on the sound that chimes when a maneuver is supposed to be occurring. SETTING VOICE GUIDANCE AT INTERSECTIONS DISPLAYING SMALL TURN ARROW ON MAP The guidance screen displayed when the vehicle passes through an intersection can be changed. 6. Highlight the preferred item and push . 1. Push . 2. Highlight [Navigation] and push . 3. Highlight [Guidance Settings] and push . 4. Highlight [Voice Guidance Settings] and push . 5.
Black plate (115,1) illuminates. 6. Push
Black plate (116,1) SET AVERAGE SPEEDS The required time to the destination can be calculated based on the set vehicle speeds. 8. After finishing the setting, push or to activate the setting. 9. Push to return to the previous screen. Push
Black plate (16,1) 6 Storing location/route Storing location . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Storing location by searching . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-2 Storing current vehicle location. . . . . . . . . . . . . . . . . . . . . . . . . . 6-3 Storing location by moving map. . . . . . . . . . . . . . . . . . . . . . . . . 6-4 Storing route. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (120,1) STORING LOCATION Often visited locations can be stored in the Address Book. The stored addresses can be easily retrieved to set them as a destination or waypoint. INFO: . The Address Book can store up to 300 locations. . New information placed in the same storage position will overwrite the old data. 3. Highlight [Address Book] and push . 5. Highlight [Home Location (None)] or [Add New] and push . 4. Highlight [Stored Location] and push . 6.
Black plate (121,1) INFO: . . 7. When a preferred location is displayed at the center of the map, confirm the address of the location and push . A message is displayed, and the address of the location is stored in the Address Book. When the location is stored in the Address Book, [Address Book] can be used to search for the location. A location can be adjusted by selecting [Move Location] using the same method as the one for a destination.
Black plate (122,1) the current vehicle location is stored in the Address Book. 4. The icon representing the stored location is displayed on the map. Push
Black plate (123,1) STORING ROUTE A maximum of 5 calculated routes can be stored. Stored routes can be easily retrieved and set as the suggested route. 3. H i g h l i g h t [ S t o r e R o u t e ] a n d p u s h . INFO: Stored route includes only locations (destination and waypoints) and route calculation conditions, not the route itself. 1. Push . 4. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The current route is stored.
Black plate (124,1) STORING TRACKED ROUTE A travelled route up to the current location can be stored. A maximum of 5 tracked routes can be stored. OTHER SETTINGS A tracked route can also be stored using the following procedure. 1. Push
Black plate (125,1) STORING AVOID AREA An Avoid Area can be stored. The Avoid Area is an area that can be excluded from a route, such as a road that is always congested. Once Avoid Areas are stored, the system avoids those areas when calculating a route. Up to 10 Avoid Areas can be stored. 1. Push . 4. Highlight [Avoid Area] and push . 6. Highlight the appropriate method to search for a location and push . “4. Setting destination” 2. Highlight [Navigation] and push . 5.
Black plate (126,1) EDITING ADDRESS BOOK . . . . [Move Location]: Adjusts the location of the Avoid Area. “Move Location” (page 6-18) [Resize Area]: Adjusts the range of the Avoid Area. “Resize Area” (page 6-18) [FWY]: Avoids Freeways. “FWY” (page 6-18) [Delete]: Deletes the avoid area. “Delete” (page 6-19) 8. After finishing the setting, highlight [OK] and push . Items stored in the Address Book can be modified. These settings can be edited to make the navigation system more useful.
Black plate (127,1) EDITING STORED HOME AND ADDRESS 3. Highlight the preferred item and push . 1. Highlight [Stored Location] and push . 2. Highlight the stored home location or preferred stored address and push . INFO: Highlighting [Sort] displays a list of various sort functions. To use the sort functions, stored locations must be set in advance. “STORING LOCATION” (page 6-2) Available setting items . [Edit]: Edits the stored address information. .
Black plate (128,1) MINOR ADJUSTMENT OF HOME OR STORED ADDRESS When [Edit] is selected, you can edit the following items of the home or stored location can be edited. . [Show Icon on Map]: . [Name] (only for stored locations): . [Voicetag] (only for stored location): . [Icon]: . [Sound]: . [Direction]: . [Distance]: . [Phone No.]: . [Group] (only for stored locations): .
Black plate (129,1) 4. Highlight [OK] and push . The name is stored. Icon Changes the icon of the home or stored address to the preferred one. By changing the icons, the usage of the [By Icon] option of the sort function can be optimized more effectively ([Sort] menu situation). Voicetag (only for stored locations) 3. A beep sounds, and the system enters the voice command reception mode. 1. Highlight [Voicetag] and push . 4. Speak the name/word to be used as Voicetag. 5.
Black plate (130,1) 3. The icon is changed. Sound Sets the tone of the alarm that sounds when the vehicle approaches the home or a stored address. illuminates. Sound list: Direction Sets the alarm to sound when approaching from a specific direction. None Chime Melody Sound Dog Cat Wave Church bell Music Box 1 1. Highlight [Sound] and push . A sound list is displayed. Music Box 2 Marimba 1. Highlight [Direction] and push .
Black plate (131,1) INFO: Phone No. After the direction is set and [Direction] is selected and set again, a confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The set direction is overwritten. Stores the telephone number of the home or a stored location. Distance Sets the alarm to sound when reaching a specific distance to the home or stored address. 1. Highlight [Distance] and push . 2.
Black plate (132,1) Entry Number (only for stored locations) Index the position numbers of any two stored locations in the list. 3. Enter the telephone number of the home or stored location. “NUMBER INPUT SCREEN” (page 211) 1. Highlight [Group] and push . 1. Highlight [Entry Number] and push . A list of stored locations is displayed. 4. Highlight [OK] and push . The telephone number is stored.
Black plate (133,1) EDITING STORED ROUTE 1. Highlight [Stored Routes] and push . 2. Highlight the preferred stored route and push . INFO: If [Store Current Route] is selected, the system stores the current route. Available setting items: . [Rename]: Changes the name. “CHARACTER (letters and numbers) INPUT SCREEN” (page 2-10) . [Replace]: Overwrites the stored route to the current route. . [Delete]: Deletes the stored route. . [OK]: Applies the settings. EDITING STORED TRACKING 1.
Black plate (134,1) 3. Highlight the preferred item and push . Available setting items (Current tracking): . [View Track]: Displays the tracked route up to the current location. . [Delete]: Deletes the stored current tracking. . [OK]: Applies the settings. Available setting items (Stored tracked routes): . [View Track]: Displays a stored tracked route on the map. . [Rename]: Changes the name. “CHARACTER (letters and numbers) INPUT SCREEN” (page 2-10) .
Black plate (135,1) EDITING AVOID AREA . . . . . 1. Highlight [Avoid Area] and push . 2. Highlight the preferred Avoid Area and push . [Move Location]: Adjusts the location of the Avoid Area. [Resize Area]: Adjusts the range of the Avoid Area. [FWY]: Avoids freeways. [Delete]: Deletes the Avoid Area. [OK]: Applies the setting. 4. After finishing the setting, highlight [OK] and push . INFO: An Avoid Area can be added by selecting [Add New].
Black plate (136,1) Move Location Resize Area FWY Adjusts the location of the Avoid Area. Adjusts the range of the Avoid Area. Sets the route to avoid freeways. 1. Highlight [Move Location] and push . 1. H i g h l i g h t [ R e s i z e A r e a ] a n d p u s h . 2. Adjust the location of the Avoid Area. 2. Highlight the range from 5 available levels. 1. Highlight [FWY]. To include freeways in the Avoid Area, push to illuminate this indicator. 3.
Black plate (137,1) DELETING STORED ITEM INFO: If the current vehicle location is set to an Avoid Area, the system will not provide route guidance. Delete Deletes the Avoid Area. The locations and routes in the Address Book can be deleted. Two deletion methods are available: deleting an individual item and deleting all stored items. NOTE: Deleted items cannot be restored. Before deleting an item, always make sure that the item is truly not necessary. DELETING STORED ITEM INDIVIDUALLY 3.
Black plate (138,1) 3) Highlight [Store/Edit] and push . 4) Highlight [Edit or Delete an Entry] and push . 5) Highlight a preferred address and push . “Setting destination” (page 4-1) INFO: 5. Highlight the preferred location/route for deletion and push . 7. A confirmation message is displayed. Confirm the contents of the message, highlight [Yes] and push . The stored item is deleted from the Address Book.
Black plate (139,1) DELETING INDIVIDUAL ITEM ON THE MAP DELETING ALL STORED ITEMS 1. Align the cross pointer over the preferred stored location for deletion by moving on the map. Then push . 1. Push . 4. Highlight [Delete Stored Items] and push . 2. Highlight [Navigation] and push . 2. Highlight [Delete] and push . 3. Highlight [Address Book] and push . 3. A confirmation message is displayed.
Black plate (140,1) TRANSFERRING INFORMATION TO/ FROM ADDRESS BOOK . . . . . . . [Delete Current Tracking]: Deletes the current tracked route. [Delete Stored Tracking]: Deletes all stored tracked routes. [Delete Avoid Areas]: Deletes all stored Avoid Areas. [Delete Stored Voicetags]: Deletes all stored voicetags. [Delete Previous Destinations]: Deletes all or one of the previous destinations. [Delete Previous Start Point]: Deletes all previous start points.
Black plate (141,1) 3. Highlight [Address Book] and push . 6. Highlight a stored item. The [ON] indicator illuminates. 4. Highlight [Transfer Address Book] and push . INFO: If the USB memory already has the data for a stored address, a confirmation message is displayed. Once overwritten, the original data cannot be recovered. 7. Highlight [Download] and push . 5. Highlight [Download Address Book to USB] or [Download Address Book from USB] and push . NOTE: .
Black plate (142,1) MEMO 6-24 Storing location/route Model "08NJ-N" EDITED: 2010/ 5/ 14
Black plate (19,1) 7 Viewing technical information Information screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-2 Viewing information about current vehicle location. . . . . . 7-3 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7-3 Viewing available traffic information . . . . . . . . . .
Black plate (144,1) INFORMATION SCREEN This screen sets or displays various information that is helpful for using the vehicle safely and comfortably. Available items include the vehicle information, Traffic Info. setup, current location information, GPS information, Voice recognition list and map version. INFO: An XM NavTraffic® subscription is necessary to view Traffic Info. BASIC OPERATION 1. Push . 2. Highlight the preferred item and push . Available items .
Black plate (145,1) VIEWING INFORMATION ABOUT CURRENT VEHICLE LOCATION This displays the information about the vehicle location on the route when driving according to route guidance. VIEWING AVAILABLE TRAFFIC INFORMATION Contents of vehicle location information 1 Next Street: * Displays the next street on the route. * Current Street: 2 Displays the current street on the route. 3 Previous Street: * Displays the previous street on the route.
Black plate (146,1) INFO ON ROUTE emergency situations can arise without warning. Relying only on XM NavTraffic® information may lead to a collision and could result in serious personal injury. This is only available when a route is set. The list of traffic information found on the recommended route from the current vehicle location to the destination is displayed. The detailed information about displayed events can also be checked.
Black plate (147,1) NEARBY TRAFFIC INFO. The list of available traffic information around the current vehicle location is displayed. 3. The map screen centered around the selected event is displayed. On the left screen, the detailed information about the event is displayed. The message can be scrolled using the up/ down button of the directional switch or the steering wheel switch. 1. Highlight [Nearby Traffic Info] and push . A list screen is displayed. 3.
Black plate (148,1) DISPLAY URGENT TRAFFIC INFORMATION When an urgent event is found around the current vehicle location, a message pops up automatically with a voice announcement. INFO: . Urgent traffic information is displayed regardless of whether the traffic information system is on or off. . When there are multiple urgent events, the event with the shortest direct distance from the current location is displayed. .
Black plate (149,1) : Road work : Slippery road : Weather : Incident 4 * Screen information 1 Road conditions * Free Flow: Green arrow Moderate traffic: Yellow arrow Heavy traffic: Red arrow Section affected by serious traffic event: Purple dashed arrow 2 Estimated * travel time to destination calculated with consideration of traffic information on route. Traffic indicator: Displays the reception condition of traffic information transmitted from the provider. Green: Reception condition is good.
Black plate (150,1) Traffic information display and scale levels Checking detailed information for traffic information icons on the map 2D map and Birdview Map 5 miles 10 km 2 miles 4 km 1 mile 2 km 1/2 mile 1 km 1/4 mile 500 m 1/8 mile 200 m 1/16 mile 100 m 1/32 mile 50 m 25 m 1/64 mile screen, the detailed information about the event is displayed. You can scroll the message by using the up/down button of the directional switch or the steering wheel switch. 4.
Black plate (151,1) VIEWING AVAILABLE WEATHER INFORMATION INFO: 4. Highlight the preferred setting and push . The indicator for the selected setting illuminates. Available setting items . Use Traffic Info.: Enables all traffic information related functions. . Show Incidents on Map: Displays the traffic incidents (e.g., accident) on the map screen. . Show Traffic Flow on Map: Displays the traffic flow with an arrow on the map screen. .
Black plate (152,1) DISPLAYING WEATHER INFORMATION SCREEN stantly and emergency situations can arise without warning. Relying only on XM NavWeatherTM information could result in serious personal injury. XM NavWeatherTM information is available in limited markets. To subscribe to or check if this service is available in the area, call 1-800-XMRADIO (1-800-967-2346) or access www. xmradio.com/navweather. INFO: .
Black plate (153,1) . . . . recently detected around the current location. Weather Map: Displays the current weather map for the preferred area. Temperature Map: Displays the current temperature map for the preferred area. Warnings Map: Displays the current watches/warnings map for the preferred area. Road Condition Map: Displays the current road condition map for the preferred area. 1. Push . 2. Highlight [Weather Info] and push . 4.
Black plate (154,1) INFO: Current weather and forecasts The current weather information and a three-day forecast for the current location, the destination or the preferred city. . . [Weather Info on Destination] is not available unless a destination is set for the route guidance. When a destination is not set, nearby weather information is displayed. 6. Highlight the preferred city from the list and push . INFO: [Select Other City from Menu] is not available while driving. 1.
Black plate (155,1) 5. Push to return to the previous screen. Push
Black plate (156,1) INFO: [Destination Map] is not available unless a destination is set for the route guidance. INFO: Touch [Legend] to display the map legend. Voice command 1. Push located on the steering 2. After the tone sounds, speak a command. To display the list for weather map: “Weather Map” (Alternate command mode) 2. Highlight the preferred map area and push . Temperature Map 3. A weather map is displayed. The weather and precipitation level are shown by colors.
Black plate (157,1) and colors. 4. Push to return to the previous screen. Push
Black plate (158,1) INFO: Touch [Legend] to display the map legend. Road Condition Map INFO: [Destination Map] is not available unless a destination is set for the route guidance. The current road condition can be confirmed for the current location, the destination, the entire country or the preferred city. INFO: Touch [Legend] to display the map legend. DESTINATION WEATHER ON SUGGESTED ROUTE SCREEN 3. A road condition map is displayed. The road conditions are shown by colors. 1.
Black plate (159,1) Weather information icons Clear Mostly Clear Snow Heavy Snow Dust/Sand Smoke/Ash Partly Cloudy AUTOMATICALLY DISPLAY WARNINGS/WATCHES When an urgent warning/watch is detected around the current vehicle location, a message pops up automatically with a voice announcement. Thunderstorm Mostly Cloudy Tornado/Funnel Cloud Cloudy Haze Fog Rain, Light Rain Hail Heavy Rain Freezing Rain/Ice The message includes the weather icon and text describing the event. INFO: .
Black plate (160,1) Weather information settings The settings can be confirmed and changed for the urgent weather information related functions. 1. Push . 2. Highlight [Navigation] and push . information. . Voice Announcements: Provides urgent information announcements for warnings and watches around the current location.
Black plate (161,1) MAP UPDATE INFO: . The “Other Watches” category in the “Other” category includes Inland Hurricane Watch, Hurricane Watch, Typhoon Watch, Tropical Storm Watch, Inland Tropical Storm Watch and Fire Weather Watch. .
Black plate (162,1) VIEWING NAVIGATION SYSTEM VERSION INFORMATION VIEWING GPS CURRENT LOCATION INFORMATION This displays the map version information. This displays GPS information, such as the positioning status, latitude/longitude, altitude and satellite locations. Contents of GPS information 1 GPS Reception: * Displays the GPS positioning method. 3-dimension Calculating the latitude, longitude and altitude by four or more satellites.
Black plate (22,1) 8 Other settings Settings screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-2 Display settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-3 Basic operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (166,1) SETTINGS SCREEN The navigation system can be customized to make it easier for you to use. BASIC OPERATION 1. Push . 2. Highlight the preferred setting item and push . Available setting items . [Navigation]: Adjust various settings of the navigation system. “NAVIGATION SETTING” (page 8-6) . [Audio]: Refer to the vehicle Owner’s Manual. . [Phone]: Refer to the vehicle Owner’s Manual. . [Bluetooth]: Set Bluetooth® Audio and Phone. Refer to the vehicle Owner’s Manual.
Black plate (167,1) DISPLAY SETTINGS This menu turns on and off the display, adjust the image quality of the navigation screen and change the color of the menu screen. DISPLAY ADJUSTMENT This menu turns on and off the display and adjusts the image quality of the navigation screen. Available setting items BASIC OPERATION 1. Push . 2. Highlight [Display] and push . 3. Highlight the preferred adjustment item and push .
Black plate (168,1) Display Brightness To turn off the display, push . The display can also be turned off by pushing and holding for more than 2 seconds. Adjust the display brightness by pushing the main directional buttons or rotating the center dial in the direction of [+] or [−]. Each time [+] or [−] is pushed, the display brightness changes. Available setting items . [Display]: Turn on or off the screen. “Display” (page 8-4) . [Brightness]: Adjust the screen brightness.
Black plate (169,1) Each time [+] or [−] is pushed, the display contrast changes. Background color Night screen INFO: Select to toggle between the day screen and night screen. 2. Highlight the preferred menu color and push . The background color setting can also be changed using . SETTING COLOR THEME Day screen 1. Highlight [Color Theme] and push .
Black plate (170,1) NAVIGATION SETTING The navigation system can be set in details to meet the preference. BASIC OPERATION 1. Push . 2. Highlight [Navigation] and push . 3. Highlight the preferred setting item and push . Available setting items . [Address Book]: Store locations and routes, and edit the stored items. “STORING LOCATION” (page 6-2) . [Map View]: Set the display method and the direction of the map. “CHANGING MAP VIEW” (page 312) 8-6 .
Black plate (171,1) SPEED LIMIT INDICATION ON MAP OTHER NAVIGATION SETTINGS Turn the [Speed Limit Information] display on or off. The indicator light illuminates when the speed limit display function is set to on. Basic Operation 1. Push . 1. Highlight [Speed Limit Info] and push . 2. Highlight [Navigation] and push . 3. Highlight [Others] and push . 4. Highlight the preferred setting item and push . Available Setting Items 2.
Black plate (172,1) Displaying audio information on map screen 4. On the bottom of the map screen, the operating status of an audio/visual function is displayed at all times. The operating status of audio functions can be displayed on the map screen. Customizing Nearby Places The categories can be customized for searching places of interest nearby. The modified list of places of interest can be used for searching for a location using [Places]. “SEARCHING FOR DESTINATION” (page 2-15) 3.
Black plate (173,1) 5. Highlight a sub category and push . The category setting is modified. 1. Highlight [Others] and push . ABC layout 2. Highlight [Keyboard Type] and push . 6. Push
Black plate (174,1) position of the vehicle icon. . When correcting the position of the vehicle icon, the map is automatically displayed in the North Up mode. After finishing the correction, the map restores the current orientation setting. . The position and direction of the vehicle icon may be misaligned depending on the external conditions and environment. . If the vehicle icon is misaligned, drive for a while in a location where the GPS signals can be received.
Black plate (175,1) VOLUME ADJUSTMENT Available items Default] and push . . [Deletes Stored Information]: Delete the stored location and home. . [Delete All Previous Destinations]: Delete all previous destinations. . [Delete Previous Start Point]: Delete all previous start point. RESET ALL NAVIGATION SETTINGS TO DEFAULT This restores various settings (display, volume level, etc.) to the default settings. INFO: The memory contents, such as the stored locations, will not be deleted.
Black plate (176,1) CLOCK SETTINGS Setting items . [Audio Volume]: Adjust the volume level of the audio system by pushing the main directional buttons or rotating the center dial in the direction of [+] or [−]. . [Guidance Volume]: Adjust the volume level of voice guidance by pushing the main directional buttons or rotating the center dial in the direction of [+] or [−]. .
Black plate (177,1) LANGUAGE AND UNIT SETTINGS Setting items . [On-screen Clock]: Select to toggle the clock display located in the top right corner of the display between on and off. The indicator light illuminates when the clock display is set to on. . [Clock Format (24h)]: Select the clock format between 12-hour and 24-hour times. The indicator light illuminates when the clock is set to the 24hour format. .
Black plate (178,1) UNIT SETTINGS 5. Highlight the preferred setting item and push . The indicator light of the selected item illuminates. Available languages: — [English] — [Français] — [Español] 1. Push . 2. Highlight [Others] and push . 3. Highlight [Language & Units] and push . NOTE: 5. Highlight the preferred unit and push . The indicator of the selected unit illuminates. Available units: — US: mile, MPH, 8F, MPG — Metric: km, km/h, 8C, L/100 km 6.
Black plate (25,1) 9 Voice recognition NISSAN voice recognition . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Standard mode. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-2 Confirming how to use voice commands. . . . . . . . . . . . . . 9-2 Using the system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-4 Before starting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (182,1) NISSAN VOICE RECOGNITION NISSAN Voice Recognition allows hands-free operation of the navigation system and other systems equipped on this vehicle, in one of two modes, Standard Mode or Alternate Command Mode. Standard Mode allows the operation of Navigation, Phone, Audio, Information and Help. The commands that are available are always shown on the display and announced by the system. To perform operations, simply follow the prompts given by the system.
Black plate (183,1) Available items: . [Getting Started]: Describes the basics of how to operate the voice recognition system. . [Let’s Practice]: Mode for practice following the system voice. . [Using the Address Book]: Tutorial for entering a destination by the Address Book. . [Finding a Street Address]: Tutorial for entering a destination by street address. . [Placing Calls]: Tutorial for making a phone call by voice command operation. Refer to the vehicle Owner’s Manual for details. .
Black plate (184,1) Useful tips for correct operation It is possible to display useful speaking information that may help the system to accept a voice command correctly. 1. Highlight [Help on Speaking] and push . 2. To confirm the page, scroll the screen using the up and down switches of the main directional buttons or the center dial. 9-4 USING THE SYSTEM GIVING VOICE COMMANDS Initialization 1. Push
Black plate (185,1) . . . . . those that are displayed are not accepted. Follow the prompts given by the system. If the command is not accepted, the system announces, “Please say again”. Repeat the command in a clear voice. Push once to return to the previous screen. To cancel the command, push and hold >. The message, “Voice can to stop the voice Push
Black plate (186,1) Command List Category Command: Command Action Navigation Operates Navigation function. Phone Operates Phone function. Information Displays vehicle Information function. Audio Operates Audio function. Displays User Guide. Help Navigation Command: Command Action Home Sets a route to the home that is stored in the Address Book. Address Searches for a location by the street address specified, and sets a route (for continental U.S. only).
Black plate (187,1) Information Command: Command Action Fuel Economy Displays fuel economy information. Trip Computer Displays trip information. Maintenance Displays maintenance information. Traffic Information Turns the traffic information system on or off. Displays the current location. Where am I? Vehicle Phone Command: Command Action Dial Number Makes a call to a spoken phone number up to 10 digits. Vehicle Phonebook Makes a call to a contact that is stored in the Vehicle Phonebook.
Black plate (188,1) Audio Command: Command Action AM Turns to the AM band, selecting the station last played. FM Turns to the FM band, selecting the station last played. XM Turns to the XM Satellite band, selecting the channel last played. Music Box Turns on the “Music Box” hard disk drive audio system. Starts to play a CD.
Black plate (189,1) VOICE COMMAND EXAMPLES To use the voice recognition function, speaking one command is sometimes sufficient, but at other times it is necessary to speak two or more commands. As examples, some additional basic operations that can be performed by voice commands are described here. Example 1: Setting a destination by a street address 1. Push located on the steering 4. Speak “Address”. 6. Speak the name of the city, “Gardena”.
Black plate (190,1) INFO: If the house number is unknown, speak “No house number”. 9. Speak the name of the street, “South Figueroa street”. INFO: . . Only the official street names stored in the map database can be recognized by the system. To improve accuracy, speak the street name precisely and include Boulevard, Way, North, South, etc., if known. If unsure of the full name, speaking only part of the street name such as “Figueroa” is acceptable, but recognition accuracy may be reduced.
Black plate (191,1) Example 2: Placing a call to the phone number 800-662-6200 1. Push located on the steering 5. Speak “800”. 7. The system announces, “Please say last four digits or say change number”. Speak “6200”. 6. The system announces, “Please say next three digits or dial, or say change number”. Speak “662”. 8. The system announces, “Dial or Change Number?”. Speak “Dial”. 2.
Black plate (192,1) . Do not add a “1” in front of the area code when speaking phone numbers. . If the system does not recognize a voice command, please try repeating the command using a natural voice. Speaking too slowly or too loudly may further decrease recognition performance. 9. The system makes a call to 800-662-6200. INFO: . Speaking “800-662-6200” (10 continuous digits) or “662-6200” (7 continuous digits) is acceptable, if the area code is not necessary.
Black plate (193,1) Alternate Command Mode 6. Speak “Dial”. 7. The system makes a call to 011-81-111222-3333. INFO: Any digit input format is available in the International Number input process. The following section is applicable when Alternate Command Mode is active. “SETTING ALTERNATE COMMAND MODE” (page 9-23) When Alternate Command Mode is active, an expanded list of commands can be used after >. In this mode, available pushing
Black plate (194,1) Available items: . [Command List]: A list of voice commands that the system can accept is displayed. . [User Guide]: A simplified operation manual of the voice recognition system can be displayed and how to use the voice commands can be confirmed. Example: Displaying the navigation command list: 1. Push . 2. Highlight [Others] and push . 3. Highlight [Voice Recognition] and push . Available items: . Phone Commands . Navigation Commands . Information Commands .
Black plate (195,1) Command List Navigation Command: Command Action Home Sets a route to your home location. Address Sets a route to the street address that you specify (for continental U.S. and Canda only). Places Sets a route to a facility near the current vehicle location. Address Book Sets a route to a location stored in the Address Book. Previous Destinations Sets a route to a previously entered destination. Previous Start Point Sets a route to the previous starting point.
Black plate (196,1) INFO: The words in italics are variable. Information Command: Command Action Fuel Economy Displays fuel economy information. Trip Computer Displays trip information. Maintenance Displays maintenance information. Where am I? Displays the current location. Traffic Information Turns the traffic information system on or off. Weather Information Displays weather information. Displays the weather map.
Black plate (197,1) Audio Command: Command Action Music Box Turns on the “Music Box” hard disk drive audio system. CD Starts to play a CD. FM Turns to the FM band, selecting the station last played. AM Turns to the AM band, selecting the station last played. XM Turns to the XM Satellite Radio band, selecting the channel last played. USB Turns on the USB memory. Bluetooth Audio Turns on the Bluetooth audio player. Turns on the AUX.
Black plate (198,1) Help Command: Command Action Navigation Commands Displays the navigation command list. Phone Commands Displays the phone command list. Audio Commands Displays the audio command list. Information Commands Displays the information command list. Help Commands Displays the help command list. User Guide Displays the User Guide The system memorizes the voices of up to three persons for better voice recognition performance.
Black plate (199,1) CONFIRMING HOW TO USE VOICE COMMANDS It is possible to confirm how to use voice commands by accessing a simplified User Guide, which contains basic instructions and tutorials for several voice commands. Basic operation 1. Push . 2. Highlight [Others] and push . 3. Highlight [Voice Recognition] and push . 4. H i g h l i g h t [ U s e r G u i d e ] a n d p u s h . 5. Highlight the preferred item and push . Available items: .
Black plate (200,1) Practicing voice commands Practice for using the voice recognition function can be performed by repeating a phrase after the system announces it. 1. Highlight [Using the Address Book] and push . The tutorial starts. 2. To confirm the page, scroll the screen using the up and down switches of the main directional buttons or the center dial. 1. Highlight [Let’s Practice] and push .
Black plate (201,1) BEFORE STARTING 2. To confirm the page, scroll the screen using the up and down switches of the main directional buttons or the center dial. Adapting System to Your Voice The voice recognition system is equipped with a learning function to adapt to the user’s voice for better recognition. It is possible to confirm how to operate the learning function through this tutorial. 2. The voice guide demonstrates the steps that have to be performed. 3.
Black plate (202,1) GIVING VOICE COMMANDS 1. Push located on the steering . Push to stop the voice prompt and give the command at once. Remember to wait for the tone before speaking. . To adjust the volume of the system feedback, push the volume control buttons [+] or [−] on the steering wheel switch or use the audio system volume control knob while the system is making an announcement. How to speak numbers 2.
Black plate (203,1) How to set 1. Push . 2. Highlight [Others] and push . 3. Highlight [Voice Recognition] and push . the voice command menu prompts are turned off. Note that in this mode the recognition success rate may be affected because the number of available commands and ways of speaking each command are increased. This mode can be turned on or off. current location map screen.
Black plate (204,1) 5. Highlight the user whose voice is memorized by the system, and push . 7. Highlight the voice command category to be learned by the system, and push . The voice command category list is displayed. 9. The system announces, “Please say a command”. 10. After the tone sounds and the icon on the ] to [ ], speak screen changes from [ a command. 6. Highlight [Start Speaker Adaptation Learning] and push . 8.
Black plate (205,1) INFO: With [Continuous Learning] set to on, the system does not go back to the command list screen, allowing to continue voice command learning by the system. 12. If the system has learned the command correctly, “None” will change to “Stored”. Editing registered items It is possible to edit user names and select learning function settings. 5. Highlight a user to edit, and push . 1. Push . 2. Highlight [Others] and push . 3.
Black plate (206,1) Example 1: Switching the map to 2D (Plan View) mode command is accepted, and the map is displayed in 2D (Plan View). Example 2: Setting a destination using places list 4. If a route is already set, choose “Near Current Location”, “Along Route” or “Near Destination”. 1. Push located on the steering 2. The system announces, “Please say a command”. 1. Push located on the steering 3.
Black plate (207,1) Example 3: Setting a destination by a street address 8. Voice feedback will be provided when the command is accepted, and the list of places of interest in the category specified in the previous step appears. 9. After the tone sounds and the icon on the screen changes again, speak “One”. 4. Speak the name of the state, “California”. 1. Push located on the steering 2. The system announces, “Please say a command”. 5. Speak the name of the city, “Gardena”. 10.
Black plate (208,1) 6. Speak the name of the street, “South Figueroa street”. INFO: Speak the street name precisely including boulevard, way, north, south, etc. In Alternate Command Mode, the system does not recognize abbreviated names when they are spoken. In this case, the system does not accept “Figueroa street” or “Figueroa”. 9. Speak the house number. “How to speak numbers” (page 9-22) INFO: If the house number is unknown, speak “No house number”. 7.
Black plate (209,1) MEMO Voice recognition 9-29 Model "08NJ-N" EDITED: 2010/ 5/ 14
Black plate (210,1) MEMO 9-30 Voice recognition Model "08NJ-N" EDITED: 2010/ 5/ 14
Black plate (28,1) 10 General system information Features of this navigation system . . . . . . . . . . . . . . . . . . . . . . . . Route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Places of interest (PLACES) directory . . . . . . . . . . . . . . . Address book. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Avoid area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (212,1) FEATURES OF THIS NAVIGATION SYSTEM ROUTE GUIDANCE The main features of the NISSAN Navigation System are visual guidance and voice guidance in selected map coverage areas. Utilizing a network of GPS (Global Positioning System) satellites, the NISSAN Navigation System tracks the location on the map and navigates to a preferred location. Once the destination is set in a map coverage area, the NISSAN Navigation System will calculate a route from the current location to the destination.
Black plate (213,1) CURRENT VEHICLE LOCATION DETOUR VOICE GUIDANCE To make a detour due to traffic conditions, the Detour function calculates an alternative route. The NISSAN Navigation System can calculate a route using secondary roads that will return to primary roads after a specified number of miles. For more information on the Detour function, refer to section 5.
Black plate (214,1) GPS signals (indicator color: gray). * * Under multi-layered highways * In a canyon Inside tunnels or parking garages INFO: The GPS antenna is located on the instrument panel inside the vehicle. Do not place any objects, especially mobile phones or transceivers, on the instrument panel. Because the strength of the GPS signal is approximately one billionth of that of TV waves, phones and transceivers will affect or may totally disrupt the signal.
Black plate (215,1) Display of GPS information GPS information can be displayed. “VIEWING GPS CURRENT LOCATION INFORMATION” (page 7-20) NOTE: Route guidance provided by the navigation system does not take carpool lane driving into consideration, especially when carpool lanes are separated from other road lanes. * When there is a similar road nearby. * When the vehicle is passing through a large Yshaped intersection/junction. * When the vehicle is traveling in an area with a grid pattern road system.
Black plate (216,1) * When the vehicle is traveling on a road with repeating S-shaped curves. * When the vehicle is on a snow-covered or unpaved road. * When the vehicle is rotated on a parking lot turntable while the ignition switch is off. * When the vehicle is on a loop bridge. * When repeatedly turning left or right, or driving in zigzags. * When driving on a road not displayed on the map screen or a road that has been changed due to additional construction or other reasons.
Black plate (217,1) “Adjusting current vehicle location” (page 8-9) DETAILED MAP COVERAGE AREAS (MCA) FOR NAVIGATION SYSTEM * When the GPS positioning accuracy is low. INFO: . The vehicle icon may be misaligned when starting the vehicle just after starting the engine. . The vehicle icon may also be misaligned if different sized tires or tire chains are installed. . The system has a function that automatically corrects the vehicle icon position when it is misaligned from the actual position. .
Black plate (218,1) ROUTE CALCULATION . There may be cases that carpool lanes are included on a suggested route when the automatic rerouting function is activated, even if the “Use Time Restricted Roads” is turned off. “SETTING CONDITIONS FOR ROUTE CALCULATION” (page 5-24) . The navigation system does not provide route guidance for roads displayed in dark green. .
Black plate (219,1) ROUTE GUIDANCE or waypoint is within the “Avoid Area”. — If a part of the route is included in the “Avoid Area”. . The following may occur when the route is displayed. — If you calculate a route on a main road, the starting point of the route may not exactly match the current vehicle location. — The endpoint of the route may not exactly match the destination. — If you calculate a route on a main road, the system may display a route from another main road.
Black plate (220,1) . Route guidance provided by the navigation system does not take carpool lane driving into consideration, especially when carpool lanes are separated from other road lanes. DIRECTIONS PROVIDED AND DISTANCES TO GUIDE POINTS 1. “In about one quarter mile (400 meters), right (left) turn.” Notification of freeway entrance 2. “Right (left) turn ahead.” Notification of consecutive intersections on ordinary roads Directions will differ, depending on the road type.
Black plate (221,1) Notification of freeway junction Notification of freeway exit 1. “In about one mile (1.6 kilometers), exit on your right.” 2. “Take the second exit on your right.” Notification when approaching destination 1. “In about one mile (1.6 kilometers), keep to the right (left) onto (road number and direction), then in about one quarter mile (400 meters) keep to the right (left).” 2.
Black plate (222,1) the road with incomplete map data. Please use the direction arrow and distance information to proceed to your destination.” REPEATING VOICE GUIDANCE This function is available throughout route guidance, from the time after the route calculation is completed until the vehicle arrives at the destination. Push . Voice guidance will be repeated. . . . INFO: .
Black plate (223,1) NOTES ON XM NavTraffic® INFORMATION able or unavailable, a route may be displayed that does not match the actual traffic restrictions. Be sure to follow the actual traffic restrictions while driving. . Canada and Alaska contain many roads with incomplete map data. As a result, when searching for a route, the route may include roads with incomplete data. In regions where road data is not complete, voice guidance may stop for long periods of time.
Black plate (224,1) NOTES ON XM NavWeatherTM INFORMATION different information sources. . The XM NavWeatherTM information service is not provided for some cities. In addition, the cities for which the weather information service is provided may be changed. . In some cases, infrastructure problems may prevent the complete display of the weather information. This is not a malfunction. .
Black plate (225,1) MAP DATA HOW TO ORDER MAP DATA UPDATES To order updated map data, contact the NISSAN NAVIGATION SYSTEM HELPDESK. See the contact information on the inside front cover of this manual. ABOUT MAP DATA 1. This map data has been prepared by HITACHI, LTD. under licence from ZENRIN CO., LTD. and NAVTEQ. ZENRIN CO., LTD. has added, processed and digitized data based on the digital road map data of Navigation Technologies Corporation.
Black plate (226,1) safe place and the parking brake is on. — In order to avoid a traffic accident or traffic offence, remember that actual road conditions and traffic regulations take precedence over the information contained on the navigation system. — The Software may contain inaccurate or incomplete information due to the passage of time, changing circumstances, and the sources of information used. Please respect current traffic conditions and regulations at all times while driving.
Black plate (227,1) action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of the data or the Data. The licensors, including Her Majesty, Canada Post and NRCan, shall not be liable in any way for loss of revenues or contracts, or any other consequential loss of any kind resulting from any defect in the data or the Data.
Black plate (228,1) SION OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF HITACHI OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Black plate (229,1) HOW TO HANDLE DISPLAY The display is a liquid crystal display and should be handled with care. WARNING Never disassemble the display. Some parts utilize extremely high voltage. Touching them may result in serious personal injury. CHARACTERISTICS OF LIQUID CRYSTAL DISPLAY . If the temperature inside the vehicle is especially low, the display will stay relatively dim or the movement of the images may be slow. These conditions are normal.
Black plate (230,1) MEMO 10-20 General system information Model "08NJ-N" EDITED: 2010/ 5/ 14
Black plate (31,1) 11 Troubleshooting guide Customer assistance. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Vehicle icon . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Route calculation and visual guidance . . . . . . . . . . . . . . . . . . . 11-2 11-3 11-4 11-6 Voice guidance. . . . . . . . . . . . . .
Black plate (232,1) CUSTOMER ASSISTANCE For assistance or inquiries about the NISSAN Navigation System, contact the NISSAN NAVIGATION SYSTEM HELPDESK. See the contact information on the inside front cover of this manual.
Black plate (233,1) BASIC OPERATIONS Symptom No image is displayed. No voice guidance is available. or The volume is too high or too low. Possible cause The brightness is at the lowest setting. Possible solution Adjust the brightness of the display. The system in the video mode. Push appropriate button (depending on models) on the control panel to change the mode. Refer to the vehicle Owner’s Manual. The display is turned off. Push to turn on the display.
Black plate (234,1) VEHICLE ICON Symptom Possible cause Possible solution Names of roads and locations differ between Plan View and BirdviewTM. This is because the quantity of the displayed information is reduced so that This is not a malfunction. the screen does not become too crowded. There is also a chance that names of the roads or locations may be displayed multiple times, and the names appearing on the screen may be different because of a processing procedure.
Black plate (235,1) Symptom The location of the vehicle icon is misaligned from the actual position. Possible cause Possible solution When using tire chains or replacing the tires, speed calculations based on Drive the vehicle for a while (at approximately 19 the speed sensor may be incorrect. MPH for about 30 minutes) to automatically correct the vehicle icon position. If this does not correct the vehicle icon position, contact a NISSAN dealer.
Black plate (236,1) ROUTE CALCULATION AND VISUAL GUIDANCE Symptom Possible cause Possible solution Waypoints are not included in the auto reroute calculation. Waypoints that have been already passed are not included in the auto To go to that waypoint again, edit the route. reroute calculation. Route information is not displayed. Route calculation has not yet been performed. Set the destination and perform route calculation. The vehicle is not on the suggested route. Drive on the suggested route.
Black plate (237,1) Symptom Possible cause Possible solution The part of the route that the vehicle has A route is managed by sections between waypoints. If the vehicle This is not a malfunction. already passed is deleted. passed the first waypoint, the section between the starting point and the waypoint is deleted (it may not be deleted depending on the area). An indirect route is suggested. The landmark information does not correspond to the actual information.
Black plate (238,1) VOICE GUIDANCE Symptom Voice guidance is not available. Possible cause Voice guidance is only available at certain intersections marked with In some cases, voice guidance is not available even when the vehicle should make a turn. Possible solution . This is not a malfunction. The vehicle has deviated from the suggested route. Go back to the suggested route or request route calculation again. Voice guidance is set to off. Turn on voice guidance. Route guidance is set to off.
Black plate (239,1) VOICE RECOGNITION Symptom The system does not accept the voice command. or The system accepts the voice command incorrectly. Possible cause Close the windows or have other occupants be quiet. The volume of the voice is too low. Speak louder. The volume of the voice is too loud. Speak softer. Pronunciation is unclear. Speak clearly. The voice command is given before the voice recognition system is ready.
Black plate (240,1) TRAFFIC INFORMATION Symptom The traffic information is not displayed. Possible cause Possible solution The traffic information is not set to on. Set the traffic information to on. The vehicle is in an area where traffic information is not available. Scroll to an area where traffic information is available. The subscription to XM NavTraffic® is incomplete, or the subscription to XM NavTraffic® has expired. Check the subscription status of XM NavTraffic®.
Black plate (1,1) 12 Index CURRENT LOCATION MAP SCREEN Store Location page 6-2 Nearby Places page 2-15 Map View Change View View Settings Map Settings 2D Map page 3-12 Split: 2D Map page 3-12 Birdview (3D) page 3-12 Split: Birdview Map page 3-12 Intersection page 3-14 Turn List page 3-14 Fuel Economy page 3-14 Full Map page 3-14 Map Orientation page 3-16 Long Range page 3-15 Map Color page 3-16 Birdview Angle page 3-17 Model "08NJ-N" EDITED: 2010/ 5/ 17
Black plate (2,1) Map Icons Store Tracking Left Split Map Settings page 3-18 Show All Freeway Exits on Route page 5-10 Auto.
Black plate (3,1) SCROLL LOCATION MAP SCREEN New Dest.
Black plate (4,1) DESTINATION SCREEN Change Region page 4-3 Street Address page 4-4 Places page 4-5 Home page 4-11 Address Book page 4-12 Previous Destinations page 4-13 Delete Destination page 4-13 Next Page Previous Start Point page 4-14 Stored Routes page 4-15 Phone Number page 4-16 Freeway Entrance/Exit page 4-17 Intersection page 4-18 City Center page 4-20 Model "08NJ-N" EDITED: 2010/ 5/ 17
Black plate (5,1) ROUTE SCREEN Cancel Route/Resume Route page 5-13 Edit/Add to Route page 5-14 Route Info page 5-19 Guidance Settings Guidance Voice page 5-20 Guidance Volume page 5-20 Traffic Announcement page 5-20 Recalculate page 6-5 Detour page 5-19 Traffic Detour page 5-23 Route Settings Basic Route Type page 5-24 Other Routing Choices page 5-24 Model "08NJ-N" EDITED: 2010/ 5/ 17
Black plate (6,1) SETTING SCREEN Navigation Address Book page 3-18 Map View page 3-14 Map Icons page 3-19 Guidance Settings page 5-27 Route Settings page 6-8 Traffic Info Settings page 6-7 Weather Info Settings page 6-6 Speed Limit Info page 8-7 Others page 3-19 Delete Stored Information page 8-10 Delete All Previous Destinations page 8-10 Delete All Previous Start Point page 8-10 Reset All Navigation Settings to Default page 8-10 Model "08NJ-N" EDITED: 2010/ 5/ 17
Black plate (7,1) Audio Vehicle Owner’s Manual Phone Vehicle Owner’s Manual Bluetooth Vehicle Owner’s Manual Volume & Beeps page 8-11 Display Display Adjustment page 8-3 Color Theme page 8-5 Clock Others page 8-12 Comfort Vehicle Owner’s Manual Language & Units page 8-13 Voice Recognition page 9-22 Camera Vehicle Owner’s Manual Image Viewer Vehicle Owner’s Manual Model "08NJ-N" EDITED: 2010/ 5/ 17
Black plate (8,1) INFORMATION SCREEN Fuel Economy Vehicle Owner’s Manual Maintenance Vehicle Owner’s Manual Where am I? page 7-3 Traffic Info page 7-3 Weather Info page 7-9 Map Update page 7-19 Navigation Version page 7-20 Others GPS Position page 7-20 Voice Recognition page 9-1 Model "08NJ-N" EDITED: 2010/ 5/ 17
Black plate (1,1) NUMBERS 2D map . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2 A About map data. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10-15 About route guidance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5-6 Adding destination or waypoint . . . . . . . . . . . . . . . . . . . . . 5-4 Address book . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Black plate (2,1) How How How How How to to to to to input letters and numbers. . . . . . . . . . . . . . . . 2-10 order map data updates . . . . . . . . . . . . . . . . 10-15 store home location . . . . . . . . . . . . . . . . . . . . . . 2-14 use this manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-2 view map screen. . . . . . . . . . . . . . . . . . . . . . . . . . 2-18 N Incorrect display of vehicle position . . . . . . . . . . . . . . 10-5 Info on route. . . . . . . . . . . . .
Black plate (3,1) Start menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-7 Starting route guidance . . . . . . . . . . . . . . . . . . . . . . 2-16, 5-2 Steering wheel switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-3 Storing avoid area . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7 Storing current vehicle location. . . . . . . . . . . . . . . . . . . . . 6-3 Storing home location/address . . . . . . . . . . . .
