Use and Care Manual

10
Moving your w ine chiller
●Remove all items (bot tles)
●Tape down securely all loose items (shelves) inside your appliance.
●Turn the adjustable leg up t o the base to avoid d am age.
●Tape the door shut. Be sure the appliance stays secure in the upright position during
transportation. If you absolutely need to transport the chiller horizontally, t ra nsport the chiller
on its back (door on top). Also protect outside of a ppliance with a blanket, or similar item.
Energy saving tips
The wine chiller should be lo cated in th e coolest area of th e room, away from heat pro ducing
appliances, and out of the direct sunlight.
TROUBLESHOOTING GUIDE
You can solve many co mmon wine chiller problems easily, saving you the cost of a possible
service call. Try the suggestions below to see if you can solve the problem before calling the
service.
PROBLEM
POSSIBLE CAUSE
Wine cooler does not operate.
Not plugged in.
The appliance is tu rn ed of f.
The circuit breaker tripp ed or a blown fuse.
Wine cooler is not cold enough.
External environment may require a higher
setting.
The door is opened too often.
The door is not closed completely.
The door gasket does not seal properly.
The compressor turns on and off
frequently.
The room temperature is ho tter than normal.
A lots of bottles has been added to the chiller.
The door is opened too often.
The door is not closed completely.
The temperature control is not set correctly.
The door gasket does not seal properly.
The light does not work
Not plugged in.
The circuit breaker tripp ed or a blown fuse.
The light button is “OFF”.
Vibrations.
The chiller is not leveled
The bottles are vibrating.
There is an object under the chiller.
The chiller seems to m ake too much
noise.
The flow of refrigerant is normal
The circulation of the refrigeration
The chiller is not level.
The door will not close p ro perly.
The chiller is not level.
The door was reversed and not properly
installed.
The gasket is dirty.
The shelves are out of position.