Use and Care Manual
6
How to install the handl e:
1)Pull away the sealing gasket where the handle is to be installed as shown in Fig1. The
gasket is easily displaced by hand. No tools are ne cessary.
2)Align the handle with the screws installed. Tighten the screws using a P hillips head
screwdriver until the ha ndle sets b oth flush and secured tightly against the door frame. (DO
NOT over tighten as this will cause damage to the handle assembly).
3) Install the sealing gasket to its original position.
Built-in installation
These appliances a re designed for both built-in or f re e standing installation. For bu ilt-in
installation, ensure proper service access and ventilation, allow a t least ¼” (6.35mm) space
on each side and at the top
OPERATING THE APPLIANANCE
Control Panel
①Lighting button
②
Temperature up
③
Display window
④Fahrenheit and Celsius indicate light
⑤Temperature down
⑥
Fahrenheit & Celsius switch button
⑦
Power button
1 2 3 4 5 6
7