Owner's manual

ManualsBrandsNipros ManualsAccessories for videoHDS-300

HDS-300

Operating

Instructions

For using HDS-300.

Before operating your HDS-300P, please read this manual thoroughly and keep it for future reference.

■HDS-300 / Features

・Professional studio build-up mechanism designed for compact handheld or shoulder type

camerarecorder.

Studio Build-Up Unit

・For Panasonic camerarecorder AG-HPX255/250, AG-160/A, 170series, 150 series, etc.

287

507

DC OUT Connector(XLR 4P)

DC OUT Connector(MINI 4P)

DC OUT Connector(CAMTAP)

SDI IN Connector(BNC)

SDI OUT Connectors(BNC2)

(2 output distribution)

TALLY OUT Connector(BNC)

VF IN Connector(6P)

Quick shoe adaptor

for ﬁxing MONITOR

DC IN Connector

(XLR 4P)

DC IN Connector

(BATTERY HOLDER for Li-ion battery)

SDI OUT Connector

(BNC)

RET IN Connector

(BNC)

258

FOCUS DEMAND

Input Connector

(6P )

ZOOM DEMAND

Input Connector

(12P)

ZOOM LENS OUT

Connector(8P)

Head height positioning

screws

SDI OUT Connector(BNC)

RET IN Connector(BNC)

12P CONTROL OUT

(ZOOM/FOCUS IRIS)

4P RET OUT

Cable Clamp

(right side)

(rear)

(top)

■Outsideview and Dimensioms/Parts Names and Functions

MONITOR forward-backward

positioning screw

Rear Unit (Connector panel)

Fixing Screws

7 1/4 screw holes

6 3/8 screw holes

Caution : Select an appropriate hole from among the holes

at the bottom of the HDS-300 to attach the tripod base

and tripod adaptor plate considering the balance of the

weight of the camera, monitor and HDS-300.

12 holes for the screws for the tripod base

(for tripod adaptor plate)

Summary of content (10 pages)

PAGE 1
TM Studio Build-Up Unit HDS-300 Operating Instructions For using HDS-300. Before operating your HDS-300P, please read this manual thoroughly and keep it for future reference. ■HDS-300 / Features ・Professional studio build-up mechanism designed for compact handheld or shoulder type camerarecorder. ・For Panasonic camerarecorder AG-HPX255/250, AG-160/A, 170series, 150 series, etc.
PAGE 2
■Installation 1.Mount a camera to the HDS-300 with the supplied 1/4 or 3/8 inch camera screw. For a Shoulder type camera; For a handy camera ; AG-HPX250,AG-160/A, etc. 1.1. Attach a camera to HDS-300 directly. 1. Attach a camera to HDS-300 and secure it with the supplied screw. 1.2. Using a Tripod Base 1.3. Using a Tripod Base 1. Attach a Tripod Base to the HDS-300 and secure it with the supplied screw. 1. Attach a Tripod Base to HDS-300 and secure it with the supplied screw. 2.
PAGE 3
2. Mount the HDS-300 to a tripod. 2.1. Mount the HDS-300 to a tripod directly. 2.2.Using a Tripod Base 1. Attach the tripod plate to the bottom of the HDS-300 with the supplied screw. 1. Attach a Tripod Base to a tripod and secure it with the supplied screw. 2. Mount the HDS-300 and camera to a tripod. 2. Attach a Tripod Adaptor Plate (ST-2, optional) to the bottom of the HDS-300 and secure it with the supplied screw. 3. Mount the HDS-300 and camera to a tripod.
PAGE 4
■Connection 1. Draw out the rear unit(connector panel) of the HDS-300. 1.1. Loosen the two screws. 1.1. Rear Unit(Connector panel) Fixing Screws 1.2. Draw out the rear unit. HDS-300 Rear Unit (Connector panel) 1.2. Camera 1.1. Rear Unit(Connector panel) Fixing Screws 2. Connect the necessary cables to the camera. 2.1.1.
PAGE 5
2.2.1. Shoulder type camera SDI OUT to CAMERA LENS SDI OUT SDI Cable REMOTE Cable REMOTE REMOTE HDMI DC IN to CA or REMOTE Controller DC IN DC CABLE (DC-C40M05) 2.2.2. Connect the necessary cables to the to the connectors inside of the rear unit of the HDS-300. 8P Multi Cable BDC-75 4P RET IN(8P) CONT 2 Cable to MONITOR 12P DC OUT TALLY IF IN (CAMTAP) HD-SDI IN HD-SDI OUT (VF IN) SDI OUT RET IN from CA 3. Connect with the Monitor.
PAGE 6
4. Mount the Camera Adaptor, ES-500P, PS-470PHD/1, etc.) to the V-shoe on the rear panel of the HDS-300 and connect the necessary cables. 4.1. When using CA ES-500P. VF 6P CABLE Y IN CA ES-500P Pb IN ES Cable ESC-25 ESC-50 RET OUT TALLY OUT HDS-300 VF IN MONITOR OUT EXT. AUDIO Pr IN AUX OUT CAMERA REMOTE LANC (VIDEO OUT/TC IN) MADE IN JAPAN PUSH TC OUT RCC-450P CABLE ▲ ▲HEAD SET AUDIO IN ▲ REMOT E VIDEO IN SDI IN ← RETURN → HDS-300 SDI OUT RET IN 4.2. When using CA PS-470PHD/1.
PAGE 7
5. Fix the ZOOM DEMAND and FOCUS DEMAND and connect them to the HDS-300. 5.1. In case of a handy camera, AG-HPX250, etc. 5.1.1. Fix the ZOOM DEMAND AS-1P and FOCUS DEMAND FR-P1 on the pan handles of the tripod. 5.1.2. Connect HDS-300, 12P connector with AS-1P by 12P cable ASC-AS1P(optional). And connect HDS-300, 6P connector with FR-P1 by 6P cable ASC-FR1P(optional). 6P 12P ZOOM DEMAND AS-1P FOCUS DEMAND FR-P1 5.2. In case of a shoulder type camera. 5.2.1.
PAGE 8
■Speciﬁcations Input DC IN XLR 4P 1 V-mount : Li-ion battery holder HD-SDI IN BNC 1 IF IN (VF IN) 6P 1 : TALLY IN ZOOM IN 12P 1 FOCUS IN 6P 1 Output DC OUT XLR 4P(female) 1 CAMTAP 1 MINI 4P(female) 1 : 14.1 V & 8.4 V HD-SDI OUT BNC 2 TALLY OUT BNC 1 : ON/OFF CONTROL OUT 12P 1 : ZOOM / FOCUS IRIS RET OUT 4P 1 : RET ZOOM LENS OUT 8P 1 General Power Supply 12 V DC (10 - 18 V) approx. 0.8 W Outside Dimensions approx. 287 x 258 x 507 mm (main body) Weight approx. 5.
PAGE 9
TM HDS-300 Connection Guide 1 Studio Build-Up Unit HDS-300 Operating Instructions HDS-300/HDF-700/AG-HPX255 (When not using the Camera Adaptor and Base Station) HDF-700 Panasonic AG-HPX255 DC IN SDI OUT φ3.5 4P FOCUS/IRIS RET IN 8P CONT 2 Cable φ2.
PAGE 10
TM Studio Build-Up Unit HDS-300 Connection Guide 2 HDS-300 Operating Instructions HDS-300/HDF-700/Shoulder camera (When using the Camera Adaptor and Base Station) HDF-700 Shoulder camera REMOTE ZOOM LENS SDI OUT RET IN 8P DC IN XLR 4P CONT 2 Cable REMOTE Cable ASC-1B HDS-300 8P Multi Cable BDC-75 FOCUS DEMAND for LENS 4P BNC Cable ZOOM DEMAND AS-1P BNC Cable Model AS-1 CAMTAP CA MONI TALLY 2 12P SDI IN SDI OUT P 12P ASC-AS1P 6P 6P DC IN DC OUT DC IN V-mount IF IN (VF IN) FOCU