Manual

16
2. Connect the other end of the DC powere cable to the AC adaptor.
3. Connect the cables to input and display the signals.
Connect the PC IN connector of HDO-2000/F to the PC by the D-sub 15-pin cable.
When the HD-SDI play back signal is displayed, input the playback signal to the
HD-SDI IN connector by the BNC cable. And connect the HDP-RM1A to the PB IN
connector(8-pin).
DC IN connector
POWER SW
HD-SDI IN HD-SDI OUT TALLY HD MI PC IN VBS IN PB IN POWER DC IN
OFF ON
1 GND 4 +12V
HD-SDI IN
PC IN
D-sub 15-pin
HDP-RM1A
Playback HD-SDI signal
PC
PB IN
8-pin
DC power
DC IN
1. Connect XLR 4P DC power cable to the DC IN connector on the main body.
POWER cable
POWER cable
Connection