Manual

HDM-90WV
7
HDM-90WV
Rear panel
Rear TALLY Indicator (RED only)
Lights up to RED when the tally signal is input to the PARALLEL REMOTE connector.
Set the tally functions in the MENU, REMOTE.
The brightness is exchangeable to OFF/L(low)/H(high) by the TALLY OFF/L/H display select switch.
ー(み) は、PARALLEL REMOTE のー信号で点灯の REMOTE
切替で OFF(消灯)/L(low減光)/H(high)に切がで
TALLY OFF/L/H display select switch
The brightness of the rear tally indicator(RED only) can be selected as follows.
H : The tally indicator lights up brightly.
L : The tally indicator is dimmed to the lower brightness.
OFF : The tally lamp is prevented from lighting.
ー(み) (OFF(消灯)/L(low:減光)/H(high)) に切替
TALLY HOLDER
When the rear tally is not used, the tally luminous plate is held.
ーを使用ーの発光収納
tally luminous plate