User guide

HDM-2000
Names and Functions of Parts
4
HDM-2000
Front panel
Screen
The display screen is 7.0 inches diagonal LCD (Active area : 152.4mm91.4mm).
は 7.0液晶、 画面寸法 152.4mm91.4mm で
POWER switch and POWER Indicator LED
Turn on the power supply through the DC IN(12 V) connector.
When the power is supplied, the POWER indicator LED lights on.
電源 ON す電源表示LED が点灯
TALLY indicator
Lights up when a tally signal is input to PARALLEL REMOTE connector on the rear panel.
背面の PARALLEL REMOTE 入力ー信号に点灯
MENU (menu select / setting entry and audio volume) buttons
Press center : Accesses to MENU displayed on the screen
Enters/confirms the selected item/ selected value.
Press down/up : Moves cursor down/up. Accesses to a setting item/ setting value.
Press right : Enters/confirms the selected item/ selected value and moves cursor right.
Increases volume of the audio output level of the front AUDIO OUT jack.
Press left : Moves cursor left.
Decreases volume of the audio output level of the front AUDIO OUT jack.
MENU ボ中央押す : を画面表示 選択る項を決定右に移動
MENUボ下または上押す : 上に移動設定項
MENUボす : 選択決定右に移動
MENUボす : が左に移動
MENU が表示右左のン(VOL +/-)は、前面パの AUDIO OUT が調整
MENU button
Press center 中央を
Press left 左
volume - ボ
Press up 上
Press down 下
Press right 右
volume + ボ